Xantrex PROwatt SW Auto Transfer Switch

1. Přesview

The Xantrex PROwatt SW Auto Transfer Switch (Model 808-0915) is designed to ensure seamless power switching in your mobile or off-grid power system. This automatic transfer switch intelligently transitions between shore power and inverter power, providing uninterrupted AC power to your essential devices. It is engineered for reliability and ease of integration with compatible inverter systems.

2. Bezpečnostní informace

WARNING: Multiple 120/240 Volt power sources. All sources must be secured OFF before servicing. Refer service to a qualified electrician.

• Always disconnect all power sources (utility/shore power, generator, inverter) before performing any installation or maintenance.
• Zajistěte správné uzemnění, abyste zabránili úrazu elektrickým proudem.
• Instalaci by měl provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
• Nepoužívejte spínač, pokud se jeví poškozený.

3. Obsah balení

• Xantrex 8080915 PROwatt SW Auto Transfer Switch

4. Nastavení a instalace

The Xantrex PROwatt SW Auto Transfer Switch is designed for straightforward installation. It features clearly labeled wiring terminals for connecting your AC power sources and loads. Ensure all power sources are disconnected before beginning installation.

4.1 Konec produktuview

4.2 Zapojení kabeláže

The transfer switch manages two AC inputs (Utility/Shore Power and Inverter/Generator) and one AC output (Load). The unit automatically switches to the available live source.

• AC Input 1 (Inverter/Generator): Connect the hot (black), neutral (white), and ground (green) wires from your inverter or generator to the designated terminals.
• AC Input 2 (Utility/Shore Power): Connect the hot (black), neutral (white), and ground (green) wires from your utility or shore power source to the designated terminals.
• Výstupní střídavý proud (zátěž): Connect the hot (black), neutral (white), and ground (green) wires leading to your AC loads (e.g., electrical panel) to the designated terminals.

Refer to the diagram on the product label for specific wiring configurations. Ensure all connections are secure and properly insulated.

4.3 Instalace Přample (Illustrative)

5. Návod k obsluze

The Xantrex PROwatt SW Auto Transfer Switch operates automatically. When multiple AC power sources are connected, the switch will prioritize and transfer the load to the designated primary source (typically utility/shore power) if available. If the primary source is lost, it will automatically switch to the secondary source (inverter/generator) if it is active. When the primary source returns, the switch will automatically transfer the load back.

• Ensure all power sources are properly connected and functioning.
• The transfer time is typically very fast, ensuring minimal interruption to your connected loads.

6. Údržba

The Xantrex PROwatt SW Auto Transfer Switch requires minimal maintenance. Regular inspection is recommended to ensure optimal performance and safety.

• Pravidelná prohlídka: Annually, inspect all wiring connections to ensure they are tight and free from corrosion.
• Čištění: Keep the exterior of the switch clean and free from dust and debris. Use a dry cloth for cleaning. Do not use liquid cleaners.
• Podmínky prostředí: Ensure the switch is installed in a dry, well-ventilated area, protected from extreme temperatures and direct moisture.

7. Řešení problémů

If you experience issues with your Xantrex PROwatt SW Auto Transfer Switch, consider the following troubleshooting steps:

• No Power to Loads:
  • Check if both AC input sources (utility/shore power and inverter/generator) are active.
  • Zkontrolujte, zda jsou všechna zapojení kabeláže bezpečná a správná.
  • Check circuit breakers or fuses in your power system.
• Switch Not Transferring:
  • Ensure the primary power source is truly lost or the secondary source is fully active.
  • Confirm the switch is receiving adequate voltage from the active source.
• Přehřívání:
  • Ensure the load connected does not exceed the maximum amperage rating of the switch.
  • Ověřte dostatečné větrání kolem jednotky.

If problems persist after attempting these steps, contact a qualified electrician or Xantrex customer support.

8. Specifikace

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation included with your product or visit the official Xantrex webUschovejte si účtenku jako doklad o koupi pro případ reklamace.