Seco-Larm Enforcer SD-9263-KSVQ No Touch Request-to-Exit Plate User Manual

1. Úvod

The Seco-Larm Enforcer SD-9263-KSVQ is an outdoor-rated, no-touch request-to-exit plate designed for controlled access systems. It utilizes infrared (IR) technology to detect hand waves, activating a door release without physical contact. This unit is ideal for environments requiring high hygiene standards. It also features a mechanical override for emergency or power failure situations.

2. Klíčové vlastnosti

• No-Touch Activation: Activates with a simple wave of the hand, minimizing contact.
• Adjustable Sensor Range: Detection range can be set from 2 to 7 inches (5 to 18 cm).
• Vizuální zpětná vazba: A ring illuminator changes color (red to green or green to red, selectable) upon activation.
• Mechanické ovládání: Includes a manual button for door operation, even during power outages.
• Odolná konstrukce: Made from stainless steel with an IP65 weatherproof rating for outdoor use.
• Snadné zapojení: Features a quick-connect screwless terminal block for simplified installation.
• Adjustable Trigger Duration: Output relay trigger duration is adjustable from 0.5 to 20 seconds, or set to toggle mode.

3. Nastavení a instalace

Proper installation is crucial for the optimal performance and longevity of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. This device is designed for door mount applications.

3.1 Obsah balení

• Seco-Larm Enforcer No Touch Request-to-Exit Plate (SD-9263-KSVQ)
• Montážní hardware
• Keys for mechanical override

3.2 Montáž

1. Select a suitable location on the door frame or wall adjacent to the door, ensuring it is within easy reach for users.
2. Use the provided mounting hardware to securely attach the plate. Ensure the plate is level and firmly fixed to prevent movement.
3. Route necessary wiring through the wall or door frame to the quick-connect terminal block on the back of the plate.

3.3 Zapojení

Connect the plate to your access control system or door strike using the screwless terminal block. Refer to your access control system's manual for specific wiring diagrams. The plate includes a 1A relay output.

• Příkon: Connect to a stable power source (typically 12V DC).
• Reléový výstup: Connect to the door strike or access control panel's input.
• Země: Ensure proper grounding for safe operation.

Note: All wiring should be performed by a qualified technician in accordance with local electrical codes.

Obrázek 1: Přední view of the Seco-Larm Enforcer No Touch Request-to-Exit Plate. It features a brushed stainless steel finish, an illuminated IR sensor with a hand icon, and a mechanical override button. Text on the plate indicates 'WAVE TO OPEN' and 'ENFORCER'.

4. Návod k obsluze

4.1 No-Touch Activation

1. Approach the Seco-Larm Enforcer plate.
2. Wave your hand within the adjustable sensor range (2 to 7 inches) of the IR sensor.
3. The ring illuminator will change color (e.g., from red to green) to indicate successful activation.
4. The door will unlock or open according to the configured trigger duration.

4.2 Mechanical Override

In the event of a power failure or if no-touch activation is not desired, the mechanical override can be used.

1. Locate the manual override button on the plate.
2. Press the button to activate the door release mechanism.

4.3 Adjusting Sensor Range and Trigger Duration

The sensor range and trigger duration can be adjusted via internal potentiometers or dip switches (refer to the detailed wiring diagram provided with the product for exact locations and procedures).

• Dosah senzoru: Adjust to suit the environment, typically between 2 and 7 inches. Avoid setting it too sensitive in high-traffic areas to prevent false activations.
• Trvání spouštění: Set the time the relay remains active (0.5 to 20 seconds) or select toggle mode for continuous activation until a second wave.

5. Údržba

The Seco-Larm Enforcer No Touch Request-to-Exit Plate requires minimal maintenance due to its durable stainless steel construction and IP65 rating.

• Čištění: Periodically wipe the surface with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or sensor.
• Inspekce: Regularly check for any signs of physical damage or loose connections. Ensure the mounting remains secure.
• Výkon snímače: Test the no-touch activation periodically to ensure the sensor is functioning correctly and its range is appropriate for the environment.

6. Řešení problémů

If you encounter issues with your Seco-Larm Enforcer No Touch Request-to-Exit Plate, refer to the following common problems and solutions:

7. Specifikace

• Model: SD-9263-KSVQ
• Materiál: Nerez
• Rozměry: 4.53 x 2.76 x 0.4 palce (115 x 70 x 10 mm)
• Hmotnost položky: 4.8 unce (136 gramů)
• Typ senzoru: Infračervený (IR)
• Dosah senzoru: Adjustable 2 to 7 inches (5 to 18 cm)
• Reléový výstup: 1A
• Trvání spouštění: Adjustable 0.5 to 20 seconds or Toggle
• Hodnocení odolnosti proti povětrnostním vlivům: IP65
• Typ montáže: Držák na dveře
• Zahrnuté komponenty: Light (illuminator)

8. Záruka a podpora

8.1 Informace o záruce

This Seco-Larm Enforcer product is covered by a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, nehodou, neoprávněnou úpravou nebo nesprávnou instalací.

8.2 Technická podpora

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Seco-Larm customer support. Have your product model number (SD-9263-KSVQ) and date of purchase ready when contacting support.

Please visit the official Seco-Larm webweb s nejaktuálnějšími kontaktními informacemi a zdroji podpory.