Air King 9126

Air King 16-Inch Oscillating Residential Pedestal Fan Instruction Manual

Model: 9126

1. Důležité bezpečnostní pokyny

Please read and save these important safety instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or injury.

  • Před čištěním, údržbou nebo přemisťováním ventilátoru jej vždy odpojte od elektrické zásuvky.
  • Neprovozujte žádný ventilátor s poškozeným kabelem nebo zástrčkou. Ventilátor zlikvidujte nebo jej vraťte do autorizovaného servisního zařízení ke kontrole a/nebo opravě.
  • Neveďte kabel pod koberec. Nezakrývejte kabel kluznými koberci, běhouny nebo podobnými kryty. Kabel umístěte mimo dopravní oblast a tam, kde o něj nikdo nezakopne.
  • This fan is intended for indoor, residential use only. Do not use outdoors or for commercial purposes.
  • Do not insert fingers or any other objects through the fan guards when the fan is operating.
  • Ujistěte se, že ventilátor je umístěn na stabilním a rovném povrchu, aby se zabránilo jeho převrácení.
  • Pokud jakýkoli spotřebič používají děti nebo osoby se sníženými fyzickými, smyslovými nebo duševními schopnostmi, nebo pokud se používá v jejich blízkosti, je nutný pečlivý dohled.

2. Konec produktuview

The Air King 16-inch Oscillating Residential Pedestal Fan is designed to provide effective air circulation in various indoor settings. It features three speed settings, an oscillating function for wider coverage, and adjustable height and tilt for directional airflow.

Air King 16-inch Oscillating Residential Pedestal Fan

Image: The Air King 16-inch Oscillating Residential Pedestal Fan, featuring a round base, an adjustable stand, and a fan head with a protective grille and three blades. The fan is gray in color.

Klíčové vlastnosti:

  • 16-inch Blade Diameter: Provides substantial airflow.
  • 3 nastavení rychlosti: Allows for customized airflow intensity.
  • Oscilační funkce: Rozvádí vzduch do širší oblasti.
  • Nastavitelná výška: Column height can be adjusted from 36 inches to 52 inches.
  • Nastavitelný sklon: Fan head can be tilted 30 degrees up to 15 degrees down.
  • Odolná konstrukce: Features a powder-coated steel front guard and high-impact resistant plastic rear guard.

3. Montážní návod

Follow these steps to assemble your Air King Pedestal Fan:

  1. Sestava základny: Place the fan base on a flat, stable surface. Insert the lower pole section into the base and secure it according to the included hardware (typically a large screw or knob from underneath the base).
  2. Nastavitelná tyč: Insert the upper, adjustable pole section into the lower pole. Secure it with the provided locking mechanism or screw to prevent it from sliding down during initial setup.
  3. Nástavec hlavy ventilátoru: Carefully attach the fan head assembly to the top of the adjustable pole. Ensure it is securely fastened using the designated screw or locking pin.
  4. Guard and Blade Installation: If the fan guards and blades are not pre-assembled, follow the specific instructions provided in the packaging to attach the rear guard, then the fan blades, and finally the front guard. Ensure all clips or screws are tightened to secure the guards.

Once assembled, ensure all connections are tight and the fan is stable before plugging it in.

4. Návod k obsluze

To operate your Air King Pedestal Fan, follow these steps:

  • Připojení napájení: Plug the fan's power cord (NEMA 5-15P) into a standard 120V, 60Hz electrical outlet.
  • Výběr rychlosti: Locate the speed control knob or buttons, usually on the fan motor housing. Select your desired speed: 1 (low), 2 (medium), or 3 (high).
  • Funkce oscilace: To activate oscillation, press down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up.
  • Nastavení výšky: To adjust the fan's height, loosen the height adjustment collar on the pole, raise or lower the upper pole section to the desired height (between 36 and 52 inches), and then securely tighten the collar.
  • Nastavení sklonu: To adjust the fan head's angle, loosen the tilt adjustment knob or screw on the side of the fan head assembly. Tilt the head to the desired angle (30 degrees up to 15 degrees down) and then securely tighten the knob or screw.
  • Vypnout: To turn off the fan, set the speed control to the '0' or 'OFF' position. Unplug the fan from the outlet when not in use for extended periods.

5. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho ventilátoru.

Čištění:

  • Před čištěním vždy odpojte ventilátor.
  • Použijte měkký, damp hadříkem otírejte vnější povrchy ventilátoru. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • To clean the fan blades and inside the guards, you may need to remove the front guard. Refer to the assembly instructions for guard removal. Carefully wipe the blades and interior surfaces with a damp hadříkem. Před opětovnou montáží a uvedením ventilátoru do provozu se ujistěte, že jsou všechny díly zcela suché.
  • Neponořujte ventilátor do vody a nedovolte, aby voda kapala do krytu motoru.

Skladování:

When storing the fan, especially for extended periods, cover it to protect it from dust. Store it in a cool, dry place.

6. Řešení problémů

Pokud narazíte na problémy s ventilátorem, podívejte se na následující běžné problémy a jejich řešení:

  • Ventilátor se nezapne:
    • Ujistěte se, že je napájecí kabel bezpečně zapojený do funkční elektrické zásuvky.
    • Check if the speed control is set to an 'ON' position (1, 2, or 3).
    • Zkontrolujte, zda se nevypnul jistič nebo pojistka zásuvky.
  • Fan does not oscillate:
    • Ensure the oscillation knob on top of the motor housing is pressed down.
    • Check for any obstructions preventing the fan head from rotating.
  • Snížené proudění vzduchu:
    • Clean the fan blades and guards to remove dust and debris that may be obstructing airflow.
    • Ensure the fan is set to a higher speed setting.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

7. Specifikace

SpecifikaceDetail
ZnačkaVzdušný král
Číslo modelu9126
Průměr čepele16 palců
Počet rychlostí3
svtage120V
Frekvence60 Hz
Průtok vzduchu (CFM)1580 (High) / 1420 (Medium) / 1220 (Low)
RPM1450 (High) / 1320 (Medium) / 1050 (Low)
Ampvymazat0.60 (High) / 0.50 (Medium) / 0.45 (Low)
Wattage77 (High) / 65 (Medium) / 57 (Low)
VýškaNastavitelné od 36 palců do 52 palců
Šířka18 palců
Délka18 palců
BarvaŠedá
Ochranný materiálPowder Coated Steel Front with High Impact Resistant Plastic Rear
Materiál čepelePolypropylen
Konfigurace NEMA zástrčky5-15P
Délka kabelu6 stop
NormyETL and OSHA Compliant Guards
Hmotnost položky0.93 libry (přibližně 14.9 uncí)
Typ materiáluLegovaná ocel, plast

8. Záruka a zákaznická podpora

This Air King product is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Air King webwebu. Uschovejte si účtenku jako doklad o koupi.

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Air King customer support. Contact details can typically be found on the product packaging or the manufacturer's official webmísto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.