BLACK+DECKER LPP120

BLACK+DECKER 20V MAX Cordless Pole Saw Kit

Model: LPP120

Důležité bezpečnostní informace

Read all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep this manual for future reference.

Obecná bezpečnostní pravidla

  • Bezpečnost pracovního prostoru: Udržujte pracovní prostor čistý a dobře osvětlený. Nepořádek nebo tmavé prostory vedou k nehodám. Nepoužívejte elektrické nářadí ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
  • Elektrická bezpečnost: Vyvarujte se tělesného kontaktu s uzemněnými povrchy, jako jsou potrubí, radiátory, sporáky a chladničky. Pokud je vaše tělo uzemněno, existuje zvýšené riziko úrazu elektrickým proudem.
  • Osobní bezpečnost: Always wear eye protection, hearing protection, and appropriate clothing. Do not overreach. Maintain proper footing and balance at all times. Stay alert, watch what you are doing, and use common sense when operating a power tool.
  • Použití a péče o nářadí: Do not force the tool. Use the correct tool for your application. Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
  • Použití a péče o akumulátorové nářadí: Nabíjejte pouze nabíječkou určenou výrobcem. Používejte elektrické nářadí pouze se speciálně určenými akumulátory.
  • Servis: Nechte své elektrické nářadí opravit kvalifikovanou osobou, která bude používat pouze identické náhradní díly. Tím zajistíte zachování bezpečnosti elektrického nářadí.

Specific Safety Warnings for Pole Saws

  • Udržujte všechny části těla v dostatečné vzdálenosti od řetězu pily, když je tyčová pila v provozu.
  • Always hold the pole saw with both hands when the motor is running.
  • Do not operate a pole saw in a tree. Always operate from the ground.
  • Always be aware of falling branches. Plan your escape path before cutting.
  • Do not use the pole saw near power lines. Maintain a safe distance from all electrical conductors.
  • Ensure the chain is properly tensioned and lubricated before each use.

Obsah balení

Verify that all items listed below are included in your package. If any items are missing or damaged, contact customer service.

  • 1 - BLACK+DECKER 20V MAX* Pole Saw with Extension
  • 1 - 20V MAX* Lithium Ion Battery
  • 1 - 20V MAX* Smart Battery Charger
  • 1 - Blade Guard
  • 1 - Oil Bottle
  • 1 - Wrench
BLACK+DECKER LPP120 Pole Saw Kit components

Image: All components of the BLACK+DECKER LPP120 Pole Saw Kit laid out, including the saw head, extension poles, battery, charger, blade guard, oil bottle, and wrench.

Shromáždění

Follow these steps to assemble your BLACK+DECKER 20V MAX Cordless Pole Saw.

  1. Připevnění prodlužovací tyče (volitelné): If extended reach is required, connect the middle extension pole to the saw head and the handle section. Ensure the easy-to-tighten locking collars are securely fastened by twisting them until snug.
  2. Nainstalujte baterii: Insert the 20V MAX Lithium Ion battery into the battery port on the handle until it clicks into place. Ensure it is fully seated.
  3. Zkontrolujte napnutí řetězu: Before first use, and periodically thereafter, ensure the saw chain is properly tensioned. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand. Use the provided wrench to adjust if necessary.
  4. Promažte řetěz: Fill the provided oil bottle with appropriate bar and chain oil (vegetable oil is recommended for live trees). Apply oil to the chain as instructed in the maintenance section.
BLACK+DECKER LPP120 Pole Saw disassembled into three sections

Image: The BLACK+DECKER LPP120 Pole Saw disassembled into three main sections: the saw head, the middle extension pole, and the handle section with the battery port.

Close-up of the BLACK+DECKER LPP120 Pole Saw's easy-to-tighten locking collars

Obrázek: Detailní záběr view of the easy-to-tighten locking collars on the BLACK+DECKER LPP120 Pole Saw, designed for secure and quick assembly of the pole sections.

Nastavení

Before operating the pole saw, ensure proper setup for safe and efficient use.

Nabíjení baterie

The 20V MAX Lithium Ion battery should be fully charged before initial use. Connect the smart charger to a standard power outlet and insert the battery. Refer to the charger's indicator lights for charging status. A full charge ensures maximum run time and performance.

Nastavení délky hole

The pole saw can be used at a length of 6.5 ft or 10 ft by adding or removing the center extension. This provides an overhead reach of up to 14 ft. Adjust the length based on the height of the branches you intend to cut, ensuring you maintain a safe working distance from the cutting area and proper balance.

BLACK+DECKER LPP120 Pole Saw showing adjustable length up to 14 feet

Image: An illustration of the BLACK+DECKER LPP120 Pole Saw highlighting its adjustable length feature, capable of reaching up to 14 feet overhead.

Návod k obsluze

Follow these guidelines for safe and effective operation of your pole saw.

Předoperační kontrolní seznam

  • Ujistěte se, že je baterie plně nabitá a bezpečně nainstalovaná.
  • Check chain tension and ensure adequate lubrication.
  • Inspect the work area for obstacles, power lines, and bystanders. Clear the area of any potential hazards.
  • Používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, rukavic a pevné obuvi.

Spouštění a zastavování

  1. To start the pole saw, depress the safety lock switch located on the handle, then squeeze the trigger.
  2. To stop the pole saw, release the trigger. The chain will stop immediately.
Close-up of the BLACK+DECKER LPP120 Pole Saw's safety lock switch and trigger

Obrázek: Detailní záběr view of the handle of the BLACK+DECKER LPP120 Pole Saw, showing the safety lock switch and the convenient trigger start mechanism.

Techniky řezání

  • Position yourself firmly on the ground, maintaining balance. Keep a clear path for falling debris.
  • Allow the saw to reach full speed before engaging the branch.
  • Use the bottom of the bar for cutting. Let the saw's weight assist in the cut, do not force it.
  • For larger branches, make relief cuts (an undercut followed by a top cut) to prevent pinching and uncontrolled falling.
  • Avoid cutting branches larger than 6 inches in diameter, as this exceeds the tool's recommended capacity.
User operating BLACK+DECKER LPP120 Pole Saw to trim high branches

Image: A person wearing safety glasses and gloves, operating the BLACK+DECKER LPP120 Pole Saw to trim high branches from a tree, demonstrating safe usage from the ground.

User operating BLACK+DECKER LPP120 Pole Saw to cut a fallen branch

Image: A person using the BLACK+DECKER LPP120 Pole Saw to cut a thick fallen branch on the ground, showcasing the saw's cutting capability.

Údržba

Regular maintenance ensures optimal performance and extends the life of your pole saw. Always disconnect the battery before performing any maintenance.

Mazání řetězu

The pole saw does not have an automatic oiler. Manually apply bar and chain oil to the chain and guide bar frequently during operation, approximately every 15-20 cuts. This reduces friction, heat, and wear. Use the provided oil bottle for convenience. For cutting live trees, vegetable oil is a suitable alternative to petroleum-based bar oil.

Nastavení napnutí řetězu

Check chain tension before each use and after every hour of operation. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand. If the chain is too loose, it can derail; if too tight, it can cause excessive wear and reduce performance. Use the provided wrench to adjust the tension screw.

Čištění a skladování

  • Před čištěním odpojte baterii.
  • Clean the saw chain and guide bar of debris, sawdust, and sap after each use.
  • Otřete vnější povrch nástroje čisticím prostředkemamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
  • Store the pole saw in a dry, secure location out of reach of children and away from direct sunlight or extreme temperatures.
  • The unit disassembles into sections for easy storage and transport.

Odstraňování problémů

V této části naleznete běžné problémy a jejich řešení. Pokud problém přetrvává, kontaktujte zákaznickou podporu.

ProblémMožná příčinaŘešení
Pila se nespustíBattery not charged; Battery not inserted correctly; Safety lock not engaged; Faulty switch.Charge battery fully; Reinsert battery firmly until it clicks; Depress safety lock before squeezing trigger; Contact service center if switch is suspected faulty.
Chain stops or cuts slowlyDull chain; Incorrect chain tension; Insufficient lubrication; Overloading the saw.Sharpen or replace chain (RC800); Adjust chain tension as per instructions; Apply more bar and chain oil frequently; Do not force the saw, allow it to cut at its own pace.
Řetěz se uvolní z vodicí lištyLoose chain tension; Worn guide bar or chain; Improper cutting technique.Adjust chain tension to be snug; Inspect and replace worn components if necessary; Ensure proper cutting technique, avoiding twisting or prying.

Specifikace

FunkceDetail
Číslo modeluLPP120
Zdroj napájení20V MAX* Lithium Ion Battery
Délka čepele8 palců
Maximální řezný průměr6 palců
Nastavitelná délka6.5 ft or 10 ft (up to 14 ft overhead reach)
Rychlost375 ot./min
Hmotnost položky10 libry
Náhradní řetězRC800

*Maximální počáteční objem baterietage (měřeno bez pracovní zátěže) je 20 voltů. Jmenovitý svtage je 18.

Záruka a podpora

This BLACK+DECKER product comes with a limited warranty. For specific warranty details, please refer to the documentation included with your product or visit the official BLACK+DECKER webmísto.

For technical assistance, replacement parts, or service, please contact BLACK+DECKER customer support through their official channels.

Další zdroje a informace o produktech naleznete také na Obchod BLACK+DECKER na Amazonu.

Další zdroje

For a comprehensive user guide, you may download the official PDF document:

Stáhnout uživatelskou příručku (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.