Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer

Zavedení

The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer is designed to automate your watering schedule, providing convenience and water conservation. This manual will guide you through the installation, programming, and maintenance of your new watering timer.

Figure 1: Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer.

Nastavení

Setting up your Orbit watering timer is a straightforward process that requires no special tools. Follow these steps for proper installation:

1. Instalace baterie: Locate the battery compartment on the back of the timer. Insert two (2) 1.5V AAA alkaline batteries, ensuring correct polarity. The timer retains its program even when batteries are changed.
2. Připojení k vodovodnímu kohoutku: Connect the timer to your outdoor hose faucet. The swivel coupling allows for quick and secure attachment without twisting the timer body. Ensure the connection is hand-tight to prevent leaks.
3. Připojte hadici: Připojte zahradní hadici k výstupu ve spodní části časovače.

Figure 2: Attaching the timer to a hose faucet.

Figure 3: The swivel coupling for easy attachment.

Návod k obsluze

The Orbit timer features an easy-to-use dial and a large digital display for simple programming. The dial cycles through various settings, allowing you to customize your watering schedule.

Kroky programování:

1. Nastavit hodiny: Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to set the current time.
2. Čas zahájení: Turn the dial to 'START TIME'. Use the '+' and '-' buttons to select when you want watering to begin.
3. Jak dlouho: Turn the dial to 'HOW LONG'. Use the '+' and '-' buttons to set the duration of each watering cycle (from 1 to 240 minutes).
4. Jak často: Turn the dial to 'HOW OFTEN'. Use the '+' and '-' buttons to set the frequency of watering (e.g., every 6 hours, 12 hours, or from once a day up to once every 7 days).
5. Run Program (Auto): Turn the dial to 'AUTO'. The timer will now run according to your programmed schedule.

Figure 4: The large digital display and intuitive dial for easy programming.

Figure 5: Water frequencies can be set from every 6 hours to once every 7 days.

Figure 6: Set watering duration from 1 to 240 minutes.

Funkce zpoždění deště:

To conserve water during rainy periods, you can activate the rain delay feature. While the dial is set to 'AUTO', press the '+' button. This will pause your watering schedule for 24, 48, or 72 hours. The timer will automatically resume the program after the selected delay period.

Figure 7: Activating the rain delay feature.

Ruční zalévání:

To water manually without interrupting your programmed schedule, press the 'MANUAL' button. You can then use the '+' and '-' buttons to set a manual watering duration. The timer will revert to its programmed schedule once the manual watering is complete.

Konec produktuview Video:

Video 1: Overview of the Orbit Hose Faucet Timer's features and operation.

Údržba

To ensure the longevity and optimal performance of your Orbit watering timer, follow these maintenance guidelines:

• Výměna baterie: Replace batteries annually or when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
• Úvahy o teplotě: The timer is designed for outdoor use but should be protected from extreme temperatures. Do not operate at temperatures exceeding 120°F (49°C) or below 32°F (0°C).
• Zimní skladování: Before the first frost, remove the timer from the faucet, remove the batteries, and store it indoors in a location where temperatures remain above 32°F (0°C). Freezing temperatures can cause damage to the internal components.
• Čištění: Periodically check the filter washer located in the timer's inlet for debris. Clean if necessary to maintain proper water flow.

Figure 8: Back of the timer with battery information and temperature warnings.

Odstraňování problémů

If you encounter issues with your Orbit watering timer, refer to the following common problems and solutions:

Specifikace

• Číslo modelu: AZ62061
• Barva: Zelený
• Materiál: Plast
• Rozměry produktu: 5"H x 3"Š x 5"V
• Hmotnost položky: 0.01 uncí
• Počet nastavení: 7
• Velikost obrazovky: 2 palce
• Potřebné baterie: Ano (2× AAA)
• Maximální provozní tlak: 100 PSI
• Rozsah provozních teplot: 0 °C až 49 °C
• Země původu: Čína
• UPC: 046878912137, 046878620612

Záruka a podpora

The Orbit 62061Z 1-Outlet Programmable Digital Hose Watering Timer comes with a 6letá záruka na díly. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For technical support, warranty claims, or additional information, please visit the official Orbit webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro účely záruky.

You can also refer to the official User Guide PDF for more detailed information: Stáhnout uživatelskou příručku (PDF)