Loctite 77164 Nickel Anti-Seize Instruction Manual

1. Konec produktuview

Loctite LB 771 Nickel Anti-Seize is a heavy-duty, high-temperature lubricant designed to prevent galling, corrosion, and reduce wear in applications involving heavy pressure. This product contains tenacious metals, oils, and graphite materials engineered to withstand extreme conditions without burning away or being removed by slow-moving parts. It offers exceptional resistance to attack by acids, ammonia, acetylene, and vinyl monomer.

It facilitates the easy assembly of stainless-steel threads and press fits by reducing friction, and ensures simple disassembly of parts even after prolonged exposure to corrosive or high-temperature environments.

Figure 1: Loctite 77164 Nickel Anti-Seize 1 lb can.

2. Bezpečnostní informace

VAROVÁNÍ: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning). Always handle with care.

POZOR: May cause allergic skin reaction. May cause eye irritation. Refer to the Safety Data Sheet (SDS) for complete safety information before use. Always wear appropriate personal protective equipment (PPE), including gloves and eye protection, when handling this product.

• Zabraňte kontaktu s pokožkou a očima.
• Používejte na dobře větraném místě.
• Nepožívejte.
• Uchovávejte mimo dosah dětí.
• Skladujte na chladném a suchém místě mimo přímé sluneční světlo a zdroje tepla.

3. Preparation and Application (Operating Instructions)

3.1 Příprava povrchu

For optimal performance, ensure surfaces are clean, dry, and free from oil, grease, and other contaminants. Use a suitable cleaner if necessary, and allow surfaces to dry completely before application.

3.2 Pokyny pro aplikaci

1. Stir the product thoroughly before use to ensure uniform consistency.
2. Apply a thin, even coat of Loctite 77164 Nickel Anti-Seize to the threads or mating surfaces of the components. Ensure complete coverage.
3. Avoid excessive application; a thin film is sufficient to provide effective anti-seize properties.
4. Assemble the components as required. The anti-seize compound will reduce friction, allowing for easier assembly and proper torque application.
5. Wipe away any excess compound immediately after assembly.

Figure 2: Loctite 77164 prevents corrosion, seizing, and galling in harsh environments.

4. Údržba a skladování

Store the Loctite 77164 Nickel Anti-Seize in its original container, tightly sealed, in a cool, dry, and well-ventilated area. Protect from freezing and direct sunlight. The recommended storage temperature is between 8°C to 28°C (46°F to 82°F). Proper storage ensures product longevity and effectiveness.

5. Řešení problémů

• Difficulty in Application: If the product appears too thick, ensure it has been stored at the recommended temperature and stirred thoroughly.
• Ineffective Anti-Seize Action: This may occur if surfaces were not properly cleaned or if an insufficient amount of product was applied. Re-clean surfaces and reapply.
• Galvanic Corrosion: While Nickel Anti-Seize is generally resistant, always be aware of potential galvanic corrosion when dissimilar metals are in contact. Consult material compatibility charts if unsure.

6. Specifikace

Figure 3: The 16 oz. (1 lb.) volume of Loctite 77164 Nickel Anti-Seize.

7. Manufacturer Contact and Support

For further technical assistance, safety data sheets, or product inquiries, please visit the official Loctite website or contact their customer support. Manufacturer: Loctite.

Více informací a podpůrných zdrojů naleznete na Loctite Store on Amazon.