Zavedení
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
Klíčové vlastnosti
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
Nastavení
To set up your Strymon El Capistan pedal, follow these steps:
- Připojení napájení: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- Vstupní připojení: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- Výstupní připojení: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- Expression Pedal (Optional): An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
Návod k obsluze
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
Primární ovládací prvky
- ČAS: Controls the delay time of the echo repeats.
- SMĚS: Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- STÁŘÍ PÁSKY: Controls the bandwidth of the tape, simulating the degradation of older tape.
- OPAKOVÁNÍ: Controls the feedback of the delay, determining the number of repeats.
- WOW & FUTTER: Controls the amount of mechanically related tape speed fluctuations, adding vintage charakter.
- Přepínač magnetofonové hlavy: Selects between three tape head configurations: Fixed, Multi, and Single.
- Přepínač MODE: Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- Nožní spínač TAP: Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- Nožní spínač BYPASS: Zapojuje nebo obchází efekt.
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
Údržba
To ensure the longevity and optimal performance of your El Capistan pedal:
- Udržujte pedál čistý a bez prachu. K čištění používejte měkký, suchý hadřík.
- Nevystavujte pedál extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk nebo slabý signál | Incorrect cable connections, faulty cables, incorrect power supply, pedal not engaged. | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| Nežádoucí hluk nebo hučení | Ground loop, faulty power supply, interference from other electronics. | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| Effect not working as expected | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Nožní spínač nereaguje | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
Specifikace
- Značka: Strymón
- Název modelu: El Capistan
- Číslo modelu: Elcapistan
- Styl: Delay, Looper, Reverb
- Barva: Black, Gray, Silver
- svtage: 9 voltů
- Amperage: 100 miliamps
- Audio Output Effects: Zpoždění
- Typ ovládání: Knoflík
- Zdroj napájení: Elektrický kabel
- Hardwarové rozhraní: 1/4palcový zvuk
- Formát signálu: Analogový
- Rozměry položky: 8 x 8 x 5 palce
- Typ konektoru: 1/4palcový (6.35mm) audio jack
- UPC: 852636007232
- Zahrnuté komponenty: Sound-on-Sound Looper, Onboard Spring Reverb
Záruka a podpora
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.
