Vivitar VIV-VT-3 Micro Tripod User Manual

1. Úvod

This manual provides instructions for the safe and effective use of your Vivitar VIV-VT-3 Micro Tripod. Please read this manual thoroughly before using the product and retain it for future reference.

The Vivitar VIV-VT-3 is a compact and portable tripod designed to provide stable support for cameras. Its small size makes it suitable for travel and on-the-go photography.

Klíčové vlastnosti:

• Kompaktní design: Perfect size to fit in a purse or backpack, enhancing portability.
• Odolná konstrukce: Engineered for sturdy support and longevity.
• Tilt Ball Head: Allows for flexible camera positioning and angle adjustments.

Figure 1: Vivitar VIV-VT-3 Micro Tripod. This image shows the compact black tripod with its three legs and integrated ball head.

2. Bezpečnostní informace

• Ujistěte se, že je stativ umístěn na stabilním a rovném povrchu, aby se zabránilo jeho převrácení.
• Do not exceed the maximum weight limit of 3.3 pounds (1.5 kg) for attached devices.
• Always secure your camera or device firmly to the tripod mount before use.
• Keep the tripod away from extreme temperatures, moisture, and corrosive materials.
• Do not attempt to force adjustments; if a part is stiff, check for obstructions.
• Uchovávejte mimo dosah dětí, abyste předešli nehodám.

3. Obsah balení

• Vivitar VIV-VT-3 Micro Tripod (1 unit)

4. Nastavení

1. Vybalte stativ: Carefully remove the Vivitar VIV-VT-3 Micro Tripod from its packaging.
2. Umístění nohou: Spread the three legs of the tripod outwards until they are fully extended and stable. Ensure all three feet are firmly on the ground.
3. Připojte své zařízení:
   • Locate the standard 1/4-inch screw on the top of the tripod's ball head.
   • Align the screw with the tripod mounting hole on the bottom of your camera or compatible device.
   • Rotate your camera clockwise onto the screw until it is securely fastened. Do not overtighten.
4. Adjust the Ball Head: The tripod features a tilt ball head for flexible positioning.
   • Loosen the locking knob (if present, typically a small knob on the side of the ball head) to allow the ball head to move freely.
   • Position your camera to the desired angle.
   • Tighten the locking knob to secure the camera in place.

5. Návod k obsluze

Once your camera is securely mounted and the tripod is set up, you can begin using it to stabilize your shots.

• Stabilní umístění: Always place the tripod on a flat, stable surface. Avoid uneven ground or slippery areas that could cause the tripod to fall.
• Nastavení úhlu: Use the tilt ball head to precisely adjust the camera's angle. Loosen the locking knob, set the angle, and then re-tighten the knob firmly.
• Přenosnost: Due to its compact size, the VIV-VT-3 is ideal for tabletop photography, low-angle shots, or as a handgrip for video recording when folded.

6. Údržba

• Čištění: Stativ otřete měkkým, suchým hadříkem. V případě odolných nečistot použijte lehceamp Lze použít hadřík a ihned osušit. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Skladování: Store the tripod in a cool, dry place away from direct sunlight and excessive dust.
• Inspekce: Periodically check all screws and connections to ensure they are tight. Do not lubricate the ball head unless specifically instructed by the manufacturer.

7. Řešení problémů

Problém: Stativ je nestabilní.

Řešení: Ensure the tripod legs are fully spread and placed on a flat, level surface. Verify that the camera is securely mounted and its weight is within the tripod's limit.

Problem: Camera is not holding its angle.

Řešení: Check that the locking knob on the ball head is fully tightened after adjusting the camera's position. If the issue persists, ensure the camera's weight does not exceed the tripod's capacity.

Problem: Camera cannot be securely attached.

Řešení: Confirm that your camera has a standard 1/4-inch tripod mounting hole. Ensure the screw on the tripod's ball head is not stripped or damaged. Rotate the camera clockwise until it is snug, but do not overtighten.

8. Specifikace

9. Záruka a podpora

Vivitar products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Vivitar webmísto.

Online podpora: www.vivitar.com/support