1.0 Úvod
The Portta N3CCSHP is an AV/S-Video to HDMI converter designed to upscale analog composite video (CVBS) or S-Video signals and R/L audio to a digital HDMI output. This device allows older equipment with analog outputs to connect to modern HDMI displays, supporting output resolutions of 720p or 1080p. It is ideal for integrating legacy devices like VCRs, DVD players, or gaming consoles with contemporary high-definition televisions or monitors.
2.0 Obsah balení
Zkontrolujte prosím, zda jsou všechny níže uvedené položky součástí balení. Pokud některé položky chybí nebo jsou poškozené, kontaktujte prosím svého prodejce.
- Portta Composite/S-video to HDMI Converter (Model: N3CCSHP) x1
- DC 5V napájecí adaptér x1
- Uživatelská příručka x1
- Záruční list x1
Image: The Portta N3CCSHP converter, DC 5V power adapter, user manual, and warranty card are included in the package.
3.0 Vlastnosti
- Converts analog Composite (RCA) and S-Video signals with R/L audio to digital HDMI output.
- Built-in scaler supports selectable HDMI output resolutions of 720p or 1080p.
- HDMI transmission rate: 5Gbps; Channel bandwidth: 165MHz/1.65Gbps per channel (4.95Gbps all channels).
- Utilizes Motion Compensated 3D Wavelet Video Coding for enhanced picture quality and vivid colors.
- Includes a 3.5mm audio output for connecting to earphones or external speaker systems.
- Plug and play operation, requiring no additional drivers for installation.
4.0 Nastavení a instalace
Follow these steps to connect your Portta N3CCSHP converter:
- Připojit zdrojové zařízení: Connect your analog source device (e.g., DVD player, VCR, game console) to the converter's AV (Composite Video and R/L Audio) or S-Video input ports using appropriate cables.
- Připojení displeje: Connect an HDMI cable from the converter's HDMI output port to an HDMI input port on your television or monitor.
- Připojení audio výstupu (volitelné): If desired, connect headphones or an external speaker system to the 3.5mm audio output jack on the converter.
- Připojte napájení: Plug the included DC 5V power adapter into the converter's DC 5V input port, then plug the adapter into a standard electrical outlet.
- Select Output Resolution: Use the '720P/1080P' switch on the converter to select your desired HDMI output resolution (720p or 1080p).
Image: This diagram illustrates the connection points for S-Video, CVBS (RCA), R/L audio input, HDMI output, and DC 5V power on the Portta N3CCSHP converter.
5.0 Návod k obsluze
Once the converter is set up, follow these steps for operation:
- Zapnutí zařízení: Ensure your source device, the Portta N3CCSHP converter, and your HDMI display are all powered on.
- Vyberte vstup na displeji: Switch your television or monitor's input source to the HDMI port where the converter is connected.
- Verify Resolution: Confirm the desired output resolution (720p or 1080p) is selected using the switch on the converter. The converter will automatically scale the input signal to the chosen HDMI output resolution.
- Užijte si obsah: The video and audio from your analog source device should now be displayed on your HDMI screen.
Image: The Portta N3CCSHP converter is shown connected between an older DVD player (via RCA cables) and a modern television, demonstrating a typical operational setup.
6.0 Řešení problémů
If you encounter issues, please refer to the following troubleshooting guide:
- Žádný obraz na displeji:
- Ensure the converter is powered on and the power LED is illuminated.
- Check all cable connections (AV/S-Video, HDMI, power) are secure.
- Ověřte, zda je váš displej nastaven na správný vstupní zdroj HDMI.
- Try switching the 720p/1080p resolution button on the converter.
- Test with different cables or a different display if possible.
- Poor Picture Quality or Distorted Image:
- Ensure the input signal from your source device is clean and stable.
- Check the quality of your AV or S-Video cables. Damaged or low-quality cables can affect signal integrity.
- Try adjusting the resolution switch on the converter (720p vs. 1080p) to see if one provides better results for your display.
- Žádný audio výstup:
- Verify that the R/L audio cables are correctly connected from your source device to the converter.
- Zkontrolujte nastavení zvuku na zdrojovém zařízení a displeji.
- If using the 3.5mm audio output, ensure your headphones or speakers are properly connected and powered.
7.0 Specifikace
| Vstupní porty | 1x Composite Video (RCA), 1x S-Video, 1x R/L Audio (RCA) |
| Výstupní porty | 1x HDMI, 1x 3.5mm Audio Jack |
| Rozlišení výstupu HDMI | 720p, 1080p (selectable) |
| HDMI Transmission Rate | 5 Gbps |
| Šířka pásma kanálu | 165MHz/1.65Gbps per channel (4.95Gbps all channels) |
| Napájení | DC 5V |
| Rozměry (D x Š x V) | 3.7 x 2.4 x 0.8 palce (112 x 70 x 23 mm) |
| Hmotnost | 0.15 libry (68 g) |
| Číslo modelu | N3CCSHP |
Image: This image provides the physical dimensions of the Portta N3CCSHP converter, measuring 112mm in length, 70mm in width, and 23mm in height.
8.0 Údržba
To ensure the longevity and optimal performance of your Portta N3CCSHP converter, please observe the following maintenance guidelines:
- Keep the device in a dry environment and avoid exposure to moisture or liquids.
- Clean the converter with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Neumisťujte zařízení na přímé sluneční světlo nebo do blízkosti zdrojů tepla.
- Do not attempt to open or modify the converter, as this will void the warranty and may cause damage.
9.0 Záruka a podpora
The Portta N3CCSHP AV/S-Video to HDMI Converter comes with a 5letá záruka bez starostí. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
For technical support, warranty claims, or further assistance, please refer to the contact information provided on your warranty card or visit the official Portta website. Please have your model number (N3CCSHP) and proof of purchase available when contacting support.