Eheim 3616090

EHEIM Jäger termostatický ohřívač do akvária 150W návod k obsluze

Model: 3616090 | Značka: Eheim

Zavedení

The EHEIM Jager Aquarium Thermostat Heater 150W is designed to provide precise and reliable temperature control for your aquarium. All EHEIM Heater models are 100% fully submersible and feature a TruTemp dial for accurate temperature recalibration. This manual provides essential information for the safe and effective use of your heater.

Vlastnosti produktu

  • Plně ponorné: Designed for complete immersion in water.
  • Thermo safety control: Protects against running dry by automatically turning off when water level dips too low.
  • TruTemp dial: Allows recalibration of the heater within a +/- 0.5°F degree accuracy for precise temperature regulation.
  • Odolná konstrukce: Made of shock-resistant and shatter-proof glass, suitable for both fresh and marine water aquariums.
  • Kontrolka zapnutí/vypnutí: Provides at-a-glance monitoring of heater operation.

Pokyny pro nastavení

Before initial use, please read the full user guide PDF for detailed instructions. Below are general steps for setting up your EHEIM Jager Heater:

  1. Rozbalit: Opatrně vyjměte ohřívač z obalu. Zkontrolujte, zda není viditelně poškozen.
  2. Umístění: Position the heater vertically and fully submerged in your aquarium. Ensure it is placed in an area with good water circulation for even heat distribution. Use the included suction cups to secure it to the aquarium glass.
  3. Nastavení teploty: Use the TruTemp dial at the top of the heater to set your desired water temperature. It is recommended to use an external thermometer to verify the actual water temperature and fine-tune the heater setting if necessary.
  4. aklimatizace: Allow the heater to acclimate to the aquarium water temperature for at least 20-30 minutes before plugging it in.
  5. Připojení napájení: Plug the heater into a grounded electrical outlet. The indicator light will illuminate when the heater is actively heating.
EHEIM Jager Aquarium Thermostat Heater 150W in its packaging.

Figure 1: The EHEIM Jager Aquarium Thermostat Heater 150W shown in its original packaging, highlighting its design and robust construction.

EHEIM Jager Aquarium Thermostat Heater 150W with 14 inch (34 cm) dimension marking.

Figure 2: A visual representation of the EHEIM Jager Aquarium Thermostat Heater, indicating its length of 14 inches (34 cm), which is important for tank placement.

Návod k obsluze

Once installed and powered on, the EHEIM Jager Heater will automatically maintain the set temperature. The internal thermostat will cycle the heating element on and off as needed. The indicator light will show when the heater is actively heating.

  • Nastavení teploty: To change the temperature, gently turn the blue TruTemp dial at the top of the heater. Rotate clockwise to increase temperature and counter-clockwise to decrease it. Make small adjustments and allow time for the water temperature to stabilize before making further changes.
  • Sledování: Regularly monitor your aquarium's temperature with a reliable external thermometer to ensure the heater is functioning correctly and maintaining the desired temperature.

Údržba

Proper maintenance ensures the longevity and efficiency of your heater. Always unplug the heater and allow it to cool completely before handling or performing any maintenance.

  • Pravidelný úklid: Periodically remove the heater from the aquarium and gently wipe down the glass tube to remove algae or mineral deposits. Use a soft cloth or sponge; avoid abrasive materials.
  • Kontrola poškození: Before re-installing, carefully inspect the glass tube and power cord for any cracks, chips, or fraying. Do not use the heater if any damage is observed.
  • Přísavky: Check the suction cups for wear and tear. Replace them if they lose their grip to ensure the heater remains securely in place.

Odstraňování problémů

If you encounter issues with your EHEIM Jager Heater, consider the following common troubleshooting steps:

ProblémMožná příčinaŘešení
Topení nehřeje / Kontrolka nesvítí
  • Není zapojeno nebo vypnutotage.
  • Teplota nastavená příliš nízko.
  • Porucha ohřívače.
  • Thermo safety control activated (low water level).
  • Zkontrolujte připojení napájení a zásuvku.
  • Zvyšte nastavení teploty.
  • Check water level; if low, refill and allow heater to reset.
  • If still not working, heater may need replacement.
Příliš vysoká/nízká teplota vody
  • Nesprávné nastavení teploty.
  • Ohřívač vodytagnedostatečné/nadměrné vzhledem k velikosti nádrže.
  • Špatná cirkulace vody.
  • Porucha ohřívače.
  • Adjust TruTemp dial gradually.
  • Zajistěte, aby topení bylotage matches tank volume.
  • Improve water circulation (e.g., with a filter or powerhead).
  • If persistent, heater may need replacement.

For more complex issues, refer to the official user guide or contact Eheim customer support.

Specifikace

AtributHodnota
Název značkyEheim
Číslo modelu položky3616090
Wattage150 wattů
Hmotnost položky0.72 libry (11.5 unce)
Rozměry položky (DxŠxV)1.42 x 13.58 palce
MateriálSklo
BarvaStříbrná, Černá
VýrobceEheim
Datum první dostupnosti25. června 2004

Záruka a podpora

For detailed warranty information and customer support, please refer to the official EHEIM user guide PDF available for download or visit the Eheim webUschovejte si účtenku jako doklad o koupi pro případné reklamace.

Oficiální uživatelská příručka (PDF): Stáhnout zde

© 2025 Eheim. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.