LUX PSP511C

LUX PSP511C Programmable Thermostat User Manual

Model: PSP511C

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your LUX PSP511C Programmable Thermostat. This thermostat is designed for 1 Heat and 1 Cool stage systems and offers 5-2 day programming capabilities. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Přední view of the LUX PSP511C Programmable Thermostat

Obrázek 1: Přední strana view of the LUX PSP511C Programmable Thermostat, showing the digital display and control buttons.

Nastavení a instalace

Správná instalace je zásadní pro optimální výkon vašeho termostatu. Pokud si nejste jisti některými kroky, poraďte se s kvalifikovaným technikem HVAC.

1. Co je v krabici

  • LUX PSP511C Thermostat Unit
  • 2 baterie AA LR6
  • 2 ST screws
  • 2 nástěnné kotvy
  • Wire label sheet
  • Návod k použití (tento dokument)

2. Zapnutí termostatu

The LUX PSP511C thermostat operates with dual power. It can be powered by your HVAC system (24 Volts) or by the included 2 AA alkaline batteries. The batteries also provide memory storage for your settings in case of power interruption, eliminating the need for a C-wire connection.

3. Montáž a zapojení

Mount the thermostat on a wall using the provided screws and anchors. Ensure the location is away from direct sunlight, drafts, or heat sources that could affect temperature readings. Connect the wiring according to your HVAC system type (1 Heat, 1 Cool). Use the wire labels for clear identification.

LUX PSP511C Thermostat highlighting easy operation, dual power, keyboard lockout, and 5-year warranty.

Figure 2: The thermostat is designed for easy operation and programming, featuring dual power options and a keyboard lockout for added security.

System compatibility chart for LUX PSP511C thermostat

Figure 3: System Compatibility. This thermostat is compatible with Gas/Oil/Electric Furnace (Heating only), Gas/Oil/Electric Furnace (Single Stage), Heat Pump without Auxiliary Heat, 2-wire Hydronic (Hot Water), 750 Millivolt, and Gas Fireplaces (24V). For cooling, it supports Cooling only and Single stage cooling. It is NOT compatible with Heat Pump Multistage, Cool Multistage, Radiant Ceiling Heat, Electric Baseboards, Portable space heaters, Plug-in air conditioners, Gas/Oil/Electric Furnace (Multistage), Heat Pump with Auxiliary Heat, or 3-wire Hydronic (Hot Water).

Návod k obsluze

The PSP511C thermostat features an intuitive control panel for easy temperature management.

Diagram of LUX PSP511C thermostat control panel with labeled components

Figure 4: Simple & Intuitive Control Panel. Key components include the LCD (Liquid Crystal Display), Set Temperature Buttons (Up/Down arrows), Fan Mode Switch (Auto/On), Temperature Mode Switch (Heat/Off/Cool), Software Reset Button, LUX Speed Dial, and Quick Reference Door Instructions.

1. Nastavení času a dne

  • Otočte voličem do polohy SET DAY/TIME.
  • Press UP or DOWN to change the day.
  • Press NEXT to advance to time setting.
  • Press UP or DOWN to change the time.
  • Rotate the dial to RUN position to save settings and close the door.

2. Regulace teploty

  • Použijte Temperature Mode Switch to select HEAT, OFF, or COOL.
  • Použijte Fan Mode Switch to select AUTO (fan runs only when heating/cooling) or ON (fan runs continuously).
  • Adjust the desired temperature using the UP/DOWN arrow buttons.

3. Programming Schedules (5-2 Day)

The thermostat allows for separate programming for weekdays (5 days) and weekends (2 days), with up to 4 periods per day (Morning, Day, Evening, Night) for both heating and cooling.

  • Rotate the dial to WEEKDAY PROGRAM or WEEKEND PROGRAM.
  • Press UP/DOWN to set the start time for the first period (e.g., MORNING).
  • Press NEXT to advance to the temperature setting for that period.
  • Press UP/DOWN to set the desired temperature.
  • Continue this process for all 4 periods and then for the weekend program if applicable.
  • Rotate the dial to RUN position to activate the program.

4. Temporary Temperature Override and Hold

  • Dočasné přepsání: Press UP or DOWN to set a desired temperature. The new set point will remain until the next programmed period change.
  • Temperature Hold: Press the HOLD button. The thermostat will maintain the current temperature indefinitely until HOLD is pressed again or the dial is rotated.

5. Blokování klávesnice

The keypad lockout feature prevents unauthorized changes to settings. Refer to the full instruction manual for specific steps on how to activate and deactivate this feature.

Údržba

1. Výměna baterie

The thermostat uses 2 AA alkaline batteries. Replace them annually or when the low battery indicator appears on the display. Open the front cover to access the battery compartment.

2. Air Filter Monitor

The thermostat includes an air filter monitor feature. When the "AIR FILTER" indicator appears, it's time to check or replace your HVAC system's air filter. After replacing the filter, press the AIR FILTER button to reset the timer.

Odstraňování problémů

If you encounter issues with your thermostat, try the following common solutions:

  • Bez displeje/napájení: Check batteries and ensure they are installed correctly. Verify power to the HVAC system.
  • Nesprávný údaj teploty: Zajistěte, aby termostat nebyl vystaven přímému slunečnímu záření, průvanu nebo zdrojům tepla.
  • Systém nereaguje: Check the Fan and Temperature mode switches. Ensure the program is set correctly or try a temporary override. Verify wiring connections.
  • Problémy s programováním: Ensure the dial is in the correct programming position (WEEKDAY PROGRAM/WEEKEND PROGRAM) and that you are pressing NEXT to advance through settings.
  • Resetování termostatu: If issues persist, press the RESET button (often a small pinhole button) to return to factory default settings. You will need to re-enter time, day, and program settings.

Specifikace

FunkceDetail
ZnačkaLUX
Název modeluPSP511C
Rozměry produktu1.5"H x 8"Š x 5.6"V
Typ ovladačeButton Control, Remote
Speciální funkceProgramovatelné
Typ řízení teplotyProgramovatelné
Zahrnuté komponenty2 AA alkalické baterie
Zdroj napájeníNapájení z baterie
Hmotnost položky0.6 libry (9.6 unce)
svtage24 voltů
Typ zobrazeníDigitální
Typ montážeDržák na zeď
StylPSP511C: 1 heat & 1 cool Stage, No Backlight
UPC021079065110, 783961829872
VýrobceEME Delaware

Informace o záruce

The LUX PSP511C Programmable Thermostat comes with a Omezená 5-letá záruka. Please retain your proof of purchase for warranty claims. For full details on warranty coverage and terms, refer to the warranty card included with your product or visit the official LUX webmísto.

Zákaznická podpora

For further assistance, technical support, or to inquire about replacement parts, please contact LUX customer service. You can find contact information on the LUX website or through the documentation provided with your thermostat.

Visit the official LUX Store: Obchod LUX na Amazonu

© 2023 LUX. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.