Samson LM5 Lavalier Microphone User Manual

1. Úvod

The Samson LM5 Lavalier Microphone is a compact, omnidirectional condenser microphone designed for clear and articulate vocal reproduction. It features a P3 (TA3F) locking connector, making it compatible with various Samson wireless bodypack transmitters, such as the UT1L. Its small size and clip-on design make it ideal for presentations, broadcasts, and other applications requiring discreet microphone placement.

Image: The Samson LM5 Lavalier Microphone, showing its compact design, foam windscreen, clip, and the P3 (TA3F) locking connector at the end of its cable.

2. Bezpečnostní informace

• Nevystavujte mikrofon extrémním teplotám, vlhkosti ani přímému slunečnímu záření.
• Zabraňte pádu mikrofonu na zem nebo jeho vystavení silným nárazům.
• Udržujte mikrofon mimo dosah silných magnetických polí.
• Nepokoušejte se mikrofon rozebírat ani upravovat. Ztratíte tak záruku.
• Clean the microphone with a soft, dry cloth only. Do not use liquid cleaners.
• Ensure proper connection to compatible equipment to prevent damage.

3. Obsah balení

Po otevření balíku ověřte, zda jsou všechny uvedené položky přítomny a v dobrém stavu:

• Samson LM5 Lavalier Microphone with P3 Connection for Bodypack Transmitters
• Samson 1 Year Limited Warranty Information

4. Nastavení

1. Připojení mikrofonu: Locate the P3 (TA3F) locking connector on the LM5 microphone cable. Align the connector with the corresponding input on your compatible Samson bodypack transmitter (e.g., UT1L). Push the connector firmly into the input until it clicks into place, indicating a secure lock.
2. Připevnění mikrofonu: Use the integrated clip to attach the LM5 microphone to clothing, such as a lapel, tie, or collar. Position the microphone approximately 6-12 inches (15-30 cm) from the speaker's mouth for optimal sound capture.
3. Windscreen Placement: Ensure the foam windscreen is securely placed over the microphone capsule. This helps to reduce plosive sounds and wind noise.

5. Návod k obsluze

The Samson LM5 is an omnidirectional microphone, meaning it picks up sound equally from all directions. This characteristic makes it forgiving in terms of placement but also susceptible to ambient noise.

1. Zapnutí: Once connected to a compatible bodypack transmitter, power on the transmitter according to its specific instructions. The microphone draws power from the transmitter.
2. Level Setting: Adjust the input gain or level on your bodypack transmitter or mixing console to achieve an optimal signal level without distortion. Monitor the audio output to ensure clear sound.
3. Sledování: Always monitor the audio output through headphones or speakers to ensure the microphone is picking up sound correctly and at the desired volume.

6. Údržba

• Čištění: Use a soft, dry, lint-free cloth to wipe down the microphone body and cable. Do not use abrasive cleaners, solvents, or chemical sprays.
• Péče o čelní sklo: The foam windscreen can be gently removed and cleaned with mild soap and water if necessary. Ensure it is completely dry before reattaching.
• Správa kabelů: Avoid sharp bends or kinks in the microphone cable. Store the cable loosely coiled to prevent damage to the internal wiring.
• Kontrola klipů: Periodically inspect the microphone clip for any signs of wear or damage. While the clip is designed for durability, excessive force or improper handling can cause breakage.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

The Samson LM5 Lavalier Microphone is covered by a Samson 1 Year Limited Warranty od data původního nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For warranty service, technical support, or product inquiries, please contact Samson customer support through their official webnebo v autorizovaných servisních střediscích. Uschovejte si doklad o koupi pro případ reklamace.

Online zdroje: For additional information, FAQs, and product registration, visit the official Samson webmísto: www.samsontech.com