Zavedení
This user manual provides comprehensive instructions for the installation, operation, and maintenance of your Chacon 34030 Coded Motion Detector Alarm. Please read this manual carefully before using the device to ensure proper functionality and safety. This alarm system is designed to provide enhanced security and peace of mind for your indoor spaces.
Konec produktuview
The Chacon 34030 is a compact motion detector alarm designed for indoor use. It features a passive infrared (PIR) sensor to detect movement, a digital keypad for arming/disarming with a programmable 4-digit code, and a powerful 130 dB siren. It can be mounted on a wall or placed on a flat surface.
Obsah balení
- 1 x Chacon 34030 Coded Motion Detector Alarm
- Montážní šrouby
- Oboustranná lepicí páska
- Uživatelská příručka (tento dokument)
Note: Four 1.5V AA batteries are required and are not included in the package.
Nastavení a instalace
1. Instalace baterie
- Locate the battery compartment on the back of the alarm unit (refer to Figure 2).
- Otevřete kryt bateriového prostoru.
- Vložte čtyři 1.5V AA baterie a dbejte na správnou polaritu (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
2. Možnosti montáže
The Chacon 34030 alarm can be installed in two ways:
- Montáž na stěnu: Use the provided screws to securely attach the alarm to a wall. Ensure the mounting surface is stable.
- Umístění povrchu: The alarm can also be placed on a flat surface such as a table, shelf, or cabinet.
3 Optimální umístění
For optimal detection, position the alarm in an area where movement is expected, such as near an entrance or hallway. The detection zone is 6 meters with a 110-degree angle. Avoid placing the unit directly facing heat sources or in direct sunlight, as this may cause false alarms.
Návod k obsluze
1. Nastavení osobního kódu
The alarm comes with a default code. It is highly recommended to change this to a personal 4-digit code for security.
- Ujistěte se, že je alarm deaktivován.
- Stiskněte tlačítko SOUBOR tlačítko.
- Enter your desired 4-digit code.
- Stiskněte tlačítko SOUBOR button again to confirm. A beep will indicate successful code change.
2. Arming the Alarm
- Enter your 4-digit code.
- Stiskněte tlačítko PAŽE tlačítko.
- The alarm will emit a series of beeps, indicating a delay period (typically 10-15 seconds) before it is fully armed. This allows you to exit the protected area.
3. Disarming the Alarm
- Upon entering the protected area, the alarm will start a delay period (typically 10-15 seconds) during which you must enter your code.
- Enter your 4-digit code.
- Stiskněte tlačítko ODZBROJIT tlačítko.
- The alarm will disarm, and the siren will stop if it was triggered.
4. Spuštění alarmu
If motion is detected while the alarm is armed, the 130 dB siren will activate immediately. The siren will sound for a set duration (e.g., 30-60 seconds) and then reset, ready to detect further motion.
Údržba
- Výměna baterie: Replace all four AA batteries when the alarm's indicator light (if present) signals low battery, or if the alarm's performance degrades. Always replace with new, high-quality alkaline batteries.
- Čištění: Gently wipe the exterior of the alarm with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the unit. Ensure the motion sensor lens is kept clean and free of dust for accurate detection.
- Testování: Periodically test the alarm by arming it and then triggering the motion sensor to ensure it is functioning correctly.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Alarm does not arm/disarm. | Zadán nesprávný kód; Slabé baterie. | Ensure the correct 4-digit code is entered. Replace batteries. |
| Alarm se falešně spustí. | Unit placed near heat source (e.g., radiator, direct sunlight); Pets or moving objects in detection zone. | Relocate the alarm away from heat sources. Adjust placement to avoid pets or curtains. |
| Siren is weak or does not sound. | Low batteries; Faulty unit. | Vyměňte baterie. Pokud problém přetrvává, kontaktujte zákaznickou podporu. |
| Cannot change code. | Incorrect procedure followed. | Refer to "Setting Your Personal Code" section and follow steps carefully. |
Specifikace
| Model: | Chacón 34030 |
| Rozsah detekce: | 6 metrů (otevřené pole) |
| Detekční úhel: | 110 stupňů |
| Hlasitost budíku: | 130 dB |
| Zdroj napájení: | 4 x 1.5V AA baterie (nejsou součástí balení) |
| Rozměry (D x Š x V): | Přibližně 29 x 24 x 19 cm (11.4 x 9.4 x 7.5 palce) |
| Hmotnost: | Přibližně 158.76 gramů (0.35 liber) |
| Používání: | Pouze pro vnitřní použití |
Informace o záruce
The Chacon 34030 Coded Motion Detector Alarm comes with a manufacturer's warranty of 2 roky from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or battery leakage. Please retain your proof of purchase for warranty claims.
Zákaznická podpora
For any questions, technical assistance, or warranty claims, please contact Chacon customer support. Refer to the official Chacon webNejnovější kontaktní informace naleznete na webu nebo na obalu produktu.
You can visit the official Chacon webstránky pro více informací: www.chacon.com