ATDEC TH-3270-UFM Full Motion Articulated Wall Mount

1. Konec produktuview

The ATDEC TH-3270-UFM is a robust full motion articulated wall mount designed to securely hold displays weighing up to 143 pounds (65 kg). This mount features three pivot points, offering comprehensive control over tilt, pan, swing, and extension, allowing for optimal viewing angles. Its SmoothGlide technology and spring-assisted tilting mechanisms facilitate effortless adjustment, enabling a single user to position the screen with ease. The die-cast aluminum arm extends up to 25 inches (635 mm) from the wall. The universal mounting hole pattern ensures compatibility with a wide range of televisions. The unit comes pre-assembled for quick and straightforward installation and supports both portrait and landscape display orientations.

2. Obsah balení

Před zahájením instalace ověřte, zda jsou přítomny všechny komponenty.

• 1 x ATDEC TH-3270-UFM Wall Mount Assembly
• Mounting Hardware Kit (includes various screws, washers, and spacers for wall and display attachment)
• Šablona instalace

3. Nastavení a instalace

Důležité bezpečnostní informace: Installation requires drilling into walls. Ensure you have the correct tools and understand how to locate wall studs or use appropriate anchors for your wall type. If unsure, consult a qualified professional. Do not exceed the maximum weight capacity of 143 lbs (65 kg).

3.1 Potřebné nástroje (není součástí balení)

• Vrtat
• Vyhledávač sloupků (pro instalaci dřevěných sloupků)
• Úroveň
• Šroubovák s křížovou hlavou
• Nástrčný klíč nebo nastavitelný klíč
• Tužka
• Měřicí páska

3.2 kroky instalace

1. Určete místo montáže: Choose a suitable wall location, ensuring it can support the weight of the mount and your display. Use a stud finder to locate wood studs or verify the integrity of concrete/brick walls.
2. Připevnění nástěnné desky: Position the wall plate at the desired height. Use the provided installation template to mark drill holes. Drill pilot holes as per the instructions for your wall type. Secure the wall plate firmly to the wall using the appropriate lag bolts and washers from the hardware kit. Ensure the wall plate is level.
3. Připevnění držáků displeje: Identify the correct screws and spacers from the hardware kit that fit the VESA mounting holes on the back of your display. Attach the display brackets to the back of your television. Ensure they are securely fastened and evenly spaced.
4. Mount Display to Arm: Carefully lift the display and align the display brackets with the mounting plate on the articulated arm. Engage the quick-release mechanism to secure the display onto the mount. Ensure the display is fully seated and locked into place.
5. Správa kabelů: Route display cables through the integrated cable management channels on the articulated arm to maintain a tidy appearance and prevent snagging.

4. Ovládání držáku

The ATDEC TH-3270-UFM mount offers versatile positioning for your display. Its SmoothGlide technology and spring-assisted mechanisms allow for fluid adjustments.

• Prodloužení/zatažení: Gently pull or push the display to extend it up to 25 inches (635 mm) from the wall or retract it closer to the wall.
• Pan/Swing: Rotate the display horizontally to achieve the desired viewing angle. The articulated arm allows for a wide range of left-to-right movement.
• Náklon: Adjust the vertical angle of the display. The spring-assisted tilt mechanism allows for easy upward or downward angling to reduce glare or optimize viewz různých výšek.
• Pivot (Landscape/Portrait): The display can be rotated 90 degrees to switch between landscape and portrait orientations. Ensure cables are not strained during this adjustment.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku.

• Pravidelná prohlídka: Annually, inspect all mounting screws and bolts to ensure they remain tight. Check for any signs of wear or damage to the mount components.
• Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Mazání: The SmoothGlide technology is designed for low maintenance. Avoid applying lubricants unless specifically instructed by ATDEC support, as this may interfere with the mechanism.

6. Řešení problémů

6.1 Mount Movement is Stiff

• Ensure no cables are caught in the articulated arm joints.
• Verify that the display weight is within the specified limit (143 lbs / 65 kg).
• Check if any adjustment screws (if present on specific joints) are overtightened. Loosen slightly if necessary, but ensure stability.

6.2 Display Not Level

• Re-check the level of the wall plate during installation.
• Some mounts allow for minor post-installation leveling adjustments on the display brackets. Consult the detailed installation guide provided with the product for specific instructions.

6.3 Mount Appears Unstable

• Immediately remove the display from the mount.
• Re-inspect all wall mounting points and display bracket connections. Ensure all screws and bolts are securely tightened.
• Verify that the wall structure is adequate to support the combined weight of the mount and display.
• If instability persists, discontinue use and contact ATDEC support or a qualified installer.

7. Specifikace

8. Informace o záruce

The ATDEC TH-3270-UFM Full Motion Articulated Wall Mount comes with a 10-letá záruka. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official ATDEC warranty documentation or contact ATDEC customer support.

9. Podpora

For technical assistance, missing parts, or warranty inquiries, please contact ATDEC customer support. Refer to the ATDEC official webweb s nejaktuálnějšími kontaktními informacemi a zdroji podpory.

ATDEC Official Webmísto: www.atdec.com