Uživatelská příručka k přenosnému DLP projektoru InFocus IN102

1. Úvod

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Mezi klíčové vlastnosti patří:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Dlouhotrvající lamp and filter-free design for reduced maintenance.

2. Co je v krabici

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Napájecí kabel
• VGA kabel
• Přepravní pouzdro
• Dálkové ovládání
• Bezpečnostní pokyny
• CD Quick Start/User Guide

3. Konec produktuview

Obrázek 3.1: Přední strana View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Obrázek 3.2: Zadní View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Obrázek 3.3: Nahoře View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Obrázek 3.4: Spodní část View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Nastavení

4.1 Umístění

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Připojení napájení

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Zapojte druhý konec napájecího kabelu do uzemněné elektrické zásuvky.

4.3 Připojení zdrojů videa

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• S-Video: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Složené video: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Před zapnutím projektoru se ujistěte, že jsou všechny kabely bezpečně připojeny.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

1. Pro zapnutí stiskněte Moc tlačítko na ovládacím panelu projektoru nebo na dálkovém ovladači. Rozsvítí se kontrolka napájení.
2. Pro vypnutí stiskněte tlačítko Moc button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 Výběr vstupního zdroje

Stiskněte tlačítko Zdroj button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Úprava obrazu

• Zaostřit a přiblížit: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Korekce lichoběžníkového zkreslení: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Jas a kontrast: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Eko režim

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D funkce

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Údržba

6.1 lamp Nahrazení

Projektor lamp má omezenou životnost. Když lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Odpojte napájecí kabel.
3. Locate and open the lamp cover on the top of the projector.
4. Opatrně odstraňte starou lamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Zajistěte lamp kryt a zapojte napájecí kabel.
6. Resetujte lamp časovač v nabídce OSD projektoru.

6.2 Čištění

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Skladování

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7. Řešení problémů

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Zkontrolujte připojení: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Použijte Zdroj button on the projector or remote to select the correct input channel corresponding to your connected device.
• Nastavení zobrazení počítače: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7nebo F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Projektor Lamp: Ověřte lamp indicator light. If it's red or blinking, the lamp může vyžadovat výměnu.

7.2 Projector Shuts Off Unexpectedly

• Přehřívání: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Problémy: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Napájení: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Problémy s kvalitou obrazu

• Rozmazaný obrázek: Adjust the focus ring on the projector lens.
• Zkreslený obraz (lichoběžník): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Dálkové ovládání nefunguje

• Baterie: Vyměňte baterie v dálkovém ovladači.
• Zornost: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Specifikace

9. Záruka a podpora

9.1 Omezená záruka

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Projektor: 5letá omezená záruka
• Díly a práce: 2-year coverage
• Lamp: 6měsíční omezená záruka

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

9.2 Zákaznická podpora

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webmísto.