POOL BLASTER Max CG

POOL BLASTER Max CG Cordless Pool Vacuum Instruction Manual

Model: Max CG (31000KL)

Zavedení

Thank you for choosing the POOL BLASTER Max CG Cordless Pool Vacuum. This commercial-grade, heavy-duty, handheld, and rechargeable cleaner is designed for efficient maintenance of both inground and above-ground pools and spas. Its hoseless design and powerful suction simplify debris removal, ensuring a clean swimming environment.

Bezpečnostní informace

  • Před použitím spotřebiče si přečtěte všechny pokyny.
  • Do not operate the vacuum out of water for extended periods to prevent motor damage.
  • Před připojením nabíječky se ujistěte, že je nabíjecí port suchý.
  • Keep children away from the appliance during operation and charging.
  • Používejte pouze dodanou nabíječku.

Obsah balení

Ověřte, zda jsou přítomny všechny položky:

  • POOL BLASTER Max CG Unit (Motor Box, Debris Chamber)
  • 12.75" Vacuum Head
  • Čepice na nos
  • X-Treme Multilayered Filter Bag (for small debris)
  • All-Purpose Filter Bag (for large debris)
  • Nástěnná nabíječka
Diagram of Pool Blaster Max CG parts including vacuum head, nose cap, X-Treme Multilayered filter bag, debris chamber, and motor box.
Obrázek 1: Rozložené view of POOL BLASTER Max CG components.

This image displays the main components of the Pool Blaster Max CG: the vacuum head, nose cap, X-Treme Multilayered filter bag, debris chamber, and motor box with the On/Off button.

Nastavení

  1. Připevnění filtračního sáčku: Insert the desired filter bag (X-Treme for fine debris or All-Purpose for large debris) into the debris chamber.
  2. Assemble Vacuum Head: Attach the 12.75" vacuum head or the nose cap to the front of the debris chamber. Ensure it clicks securely into place.
  3. Connect to Pole: Slide a standard telescopic pool pole (not included) into the pole adapter on the main unit until it locks.
Pool Blaster Max CG disassembled showing the main unit, vacuum head, and filter bag.
Figure 2: The Pool Blaster Max CG disassembled, illustrating its main components before assembly.

This image shows the main body of the vacuum, the detachable vacuum head, and the filter bag, ready for assembly.

Nabíjení

  1. Locate the charging port on the side of the main unit.
  2. Před připojením nabíječky se ujistěte, že je nabíjecí port suchý.
  3. Plug the wall charger into the charging port.
  4. Plug the charger into a standard electrical outlet. The indicator light on the charger will show charging status.
  5. A full charge takes approximately 4 hours and provides up to 60 minutes of run time.
Pool Blaster Max CG charging by an electrical outlet.
Figure 3: The Pool Blaster Max CG connected to its charger and plugged into a wall outlet.

This image demonstrates the correct way to connect the Pool Blaster Max CG to its charger for recharging.

Návod k obsluze

  1. Ponoření jednotky: Fully submerge the vacuum unit in the water before turning it on.
  2. Aktivovat: Press the On/Off button to start the vacuum.
  3. Clean Pool/Spa: Guide the vacuum along the bottom and sides of your pool or spa to collect debris. The rollers and brushes on the vacuum head assist in effective cleaning.
  4. Bodové čištění: For hard-to-reach areas or concentrated debris, use the nose cap attachment for precise spot cleaning.
  5. Vypnout: Once cleaning is complete, turn off the vacuum while it is still submerged in water.
  6. Vyjměte z vody: Carefully lift the unit out of the water.
Pool Blaster Max CG picking up dirt underwater.
Figure 4: The Pool Blaster Max CG actively vacuuming debris from the bottom of a pool.

This image shows the vacuum head effectively collecting debris from the pool floor.

Video 1: A demonstration of the Pool Blaster Max CG in use, showing its powerful suction and ease of maneuverability underwater.

This video provides a visual guide on how to operate the Pool Blaster Max CG for effective cleaning of your pool or spa.

Údržba

  1. Empty Debris Chamber: Open the debris chamber and remove the filter bag.
  2. Čištění filtračního sáčku: Rinse the filter bag thoroughly with a hose to remove all collected debris. Ensure it is clean before reinserting.
  3. Kontrolní jednotka: Periodically check the vacuum head, rollers, and brushes for wear or damage. Replace parts as needed.
  4. Skladování: Jednotku skladujte na chladném a suchém místě mimo dosah přímého slunečního záření.
Pool Blaster Max CG high-capacity filter bag with dirt inside.
Figure 5: A close-up of the high-capacity filter bag, showing collected debris.

This image highlights the filter bag's capacity for holding debris, emphasizing the need for regular cleaning.

Odstraňování problémů

ProblémMožná příčinaŘešení
Vakuum se nezapínáLow battery; Unit not fully submergedCharge battery; Submerge unit completely before activating
Snížené sáníClogged filter bag; Debris in intake; Worn brushesClean/replace filter bag; Clear intake; Replace brushes
Krátká doba běhuBattery not fully charged; Aging batteryEnsure full charge (4 hours); Consider battery replacement if performance degrades significantly

Specifikace

  • Model: Max CG (31000KL)
  • Zdroj napájení: Napájení baterií (Lithium-Ion)
  • svtage: 11.8 voltů
  • Energetický obsah lithiové baterie: 2200 XNUMX mAh
  • Doba běhu: Do 1 hodiny
  • Doba nabíjení: Přibližně 4 hodiny
  • Rozměry produktu: 12.75 cm D x 7 cm Š x 23.5 cm V
  • Hmotnost položky: 5.65 libry
  • Materiál: Plast
  • Způsob ovládání: Stiskněte tlačítko

Záruka a podpora

The POOL BLASTER Max CG comes with a 1letá omezená záruka výrobce from the purchase date. For warranty claims, technical support, or replacement parts, please contact Water Tech Corp customer service. Refer to the contact information provided in your purchase documentation or visit the official Water Tech Corp webmísto.

Výrobce: Water Tech Corp

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.