Stack-On PS-508 Extra Wide Strong Box Safe with Electronic Lock

Zavedení

Thank you for choosing the Stack-On PS-508 Extra Wide Strong Box Safe. This safe is designed to provide secure storage for your valuables, documents, and firearms. It features a durable alloy steel construction and an electronic lock for convenient access. Please read this manual carefully before setting up and operating your safe to ensure proper use and maximum security.

Důležité bezpečnostní informace

• Always keep the override keys in a secure location away from the safe. Do not store them inside the safe.
• Ujistěte se, že je trezor bezpečně upevněn, aby se zabránilo jeho neoprávněnému odebrání.
• Neskladujte hořlavé materiály ani otevřené nádoby s kapalinami uvnitř trezoru.
• Keep children away from the safe and do not allow them to play with the electronic keypad or keys.
• This safe is not fireproof or waterproof. Protect contents accordingly.

Obsah balení

Zkontrolujte prosím balení, zda jsou všechny položky přítomny:

• Stack-On PS-508 Safe Unit
• Electronic Keypad (pre-installed)
• Přepisovací klávesy (2)
• Montážní materiál (šrouby)
• Uživatelská příručka (tento dokument)

Nastavení

1. Vybalování

Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. If damaged, contact customer support immediately.

2. Instalace baterie

The electronic lock requires batteries to operate. Locate the battery compartment, typically on the inside of the safe door or behind the keypad. Insert the required number of fresh alkaline batteries, ensuring correct polarity. Close the battery compartment cover securely.

3. Montáž trezoru

For optimal security, it is highly recommended to mount the safe to a wall, floor, or other secure surface. The PS-508 safe includes pre-drilled mounting holes on the back and bottom. Use the provided mounting hardware or appropriate fasteners for your specific installation surface.

Image: The Stack-On PS-508 safe with its door open, revealing the interior. The spacious interior can accommodate items such as a laptop, documents, and other small valuables. The electronic keypad is visible on the open door.

• Montáž na stěnu: Position the safe against a wall, ideally aligning with wall studs for maximum stability. Mark the drilling points through the pre-drilled holes. Drill pilot holes and secure the safe using appropriate lag screws or bolts. Note: For wall mounting, larger bolts than those provided may be necessary for enhanced security.
• Montáž na podlahu: Place the safe in the desired location. Mark the drilling points through the pre-drilled holes on the bottom of the safe. Drill pilot holes into the floor and secure the safe using appropriate anchor bolts.

4. Nastavení počátečního kódu

Upon first use, you will need to set your personal access code. Refer to the specific instructions provided with your electronic lock for the exact procedure. Typically, this involves pressing a reset button (often inside the safe door), entering a new code, and confirming it. Choose a code that is easy for you to remember but difficult for others to guess.

Obsluha trezoru

1. Opening the Safe with Electronic Lock

Obrázek: Podrobný view of the electronic keypad and the manual override keyhole on the Stack-On PS-508 safe. The keypad features numbered buttons and indicator lights.

1. Enter your personal access code on the electronic keypad.
2. The green indicator light should illuminate, and you may hear a beep.
3. Během několika sekund otočte klikou ve směru hodinových ručiček (nebo proti směru hodinových ručiček, v závislosti na modelu) a otevřete dveře trezoru.
4. If an incorrect code is entered, the red indicator light will flash, and the safe will remain locked. After multiple incorrect attempts, the safe may enter a lockout period.

2. Opening the Safe with Override Key

In case of battery failure, forgotten code, or electronic lock malfunction, you can use the override key:

1. Locate the keyhole cover on the electronic keypad.
2. Sejměte kryt, abyste odhalili klíčovou dírku.
3. Insert one of the provided override keys into the keyhole and turn it to unlock the safe.
4. Zatímco je klíč otočený, otočte klikou pro otevření dveří trezoru.

3. Změna uživatelského kódu

To change your personal access code:

1. Otevřete dveře trezoru.
2. Locate the reset button on the inside of the safe door or near the battery compartment. Press it.
3. While the indicator light is on (usually yellow or green), enter your new desired code (typically 3-8 digits).
4. Press the '#' or '*' button (refer to your specific lock's instructions) to confirm the new code.
5. Test the new code with the door open before closing it to ensure it works correctly.

4. Varování před vybitou baterií

When the batteries are low, the electronic lock may indicate this with a specific light pattern (e.g., a red light flashing after opening) or a series of beeps. Replace the batteries promptly to avoid being locked out.

Údržba

1. Výměna baterie

Replace batteries annually or when the low battery warning is indicated. Always use fresh, high-quality alkaline batteries of the specified type.

2. Čištění

Vnější povrch trezoru očistěte měkkým hadříkem.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components. Keep the keypad free of dust and debris.

Odstraňování problémů

• Safe will not open with electronic code:
  • Ujistěte se, že jsou baterie čerstvé a správně nainstalované.
  • Re-enter the code carefully, ensuring each digit is pressed firmly.
  • If the keypad is intermittent, try replacing the batteries even if no low battery warning is present.
  • Use the override key to open the safe if the electronic lock continues to malfunction.
• Keypad makes loud beeping sound: This is normal operation for some models, indicating key presses. There is typically no way to disable this sound.
• Concerns about unauthorized opening by impact: While the safe is designed for security, no safe is entirely impervious to determined attacks. Ensure the safe is securely mounted to a robust surface as instructed in the 'Mounting the Safe' section. Proper mounting significantly enhances resistance against forced entry attempts.
• Lost or forgotten code: Use the override key to open the safe. Once open, follow the 'Changing the User Code' instructions to set a new code.

Specifikace

Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Stack-On webstránky. Uschovejte si účtenku jako doklad o vlastnictví.