Zavedení
The Creative Labs GigaWorks T20 Series II 2.0 Multimedia Speaker System is designed to deliver high-fidelity audio for your computer, TV, and other audio sources. Featuring a two-way speaker design with woven glass fiber cone drivers and cloth dome tweeters, along with BasXPort technology, these speakers provide clear highs, rich mids, and enhanced bass without the need for a separate subwoofer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your speaker system.
Co je v krabici
Upon unboxing your Creative GigaWorks T20 Series II speaker system, please ensure all the following components are present:
- GigaWorks T20 Series II Left and Right Speakers
- Stereo-to-Stereo Audio Cable
- Dual RCA-to-Stereo Adapter
- Napájecí adaptér
- Rychlý průvodce
Nastavení
- Umístění: Position the left and right speakers on either side of your computer monitor or TV, ensuring they are at an equal distance from your listening position for optimal stereo imaging.
- Connect Left Speaker: Connect the cable from the left speaker to the corresponding port on the back of the right speaker.
- Připojení zdroje zvuku: Use the provided stereo-to-stereo audio cable to connect the 'Audio In' jack on the right speaker to the audio output jack of your computer, MP3 player, or other audio device. For devices with RCA outputs (like some TVs or DVD players), use the included Dual RCA-to-Stereo Adapter.
- Připojte napájení: Plug the power supply adapter into the 'DC In' port on the right speaker, then plug the adapter into a wall outlet.
- Zapnutí: Turn the Volume knob on the front of the right speaker clockwise to power on the system. The power indicator light will illuminate.
Návod k obsluze
The GigaWorks T20 Series II speakers feature convenient front-access controls for easy adjustment of your audio experience.
- Ovládání hlasitosti: The large knob on the front panel controls the overall volume of the speakers. Turn clockwise to increase volume, counter-clockwise to decrease. It also acts as the power switch.
- Ovládání basů: Adjust the bass level using the 'Bass' knob to suit your preference.
- Ovládání výšek: Adjust the treble level using the 'Treble' knob for clearer highs.
- Sluchátkový jack: A 3.5mm headphone jack is located on the front panel for private listening. Plugging in headphones will mute the speakers.
- Pomocný vstup: A 3.5mm auxiliary input jack is available on the front panel for quick connection of portable audio devices like smartphones or MP3 players. There is also a second 3.5mm aux jack on the rear of the right speaker.
For optimal sound quality, it is recommended to set the volume on your connected audio source (e.g., computer, MP3 player) to a high level (near maximum without distortion) and then use the volume control on the GigaWorks T20 Series II speakers to adjust the listening level.
Údržba
- Čištění: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or aerosol sprays, as they may damage the finish or internal components.
- Větrání: Ensure the speakers are placed in a well-ventilated area. Do not block the BasXPort openings on the top of each speaker.
- Skladování: Pokud budete reproduktory skladovat delší dobu, odpojte je od napájení a uložte je na chladném a suchém místě.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk z reproduktorů | Speakers not powered on; Volume too low; Audio cable disconnected; Incorrect audio source selected; Muted on computer/device. | Ensure power adapter is connected and speaker is turned on. Increase speaker volume. Check all audio cable connections. Verify correct audio output is selected on your computer/device. Unmute audio on your computer/device. |
| Zkreslený zvuk | Volume too high on source device; Bass/Treble settings too extreme; Poor audio cable connection. | Reduce volume on the source device and increase speaker volume. Adjust Bass and Treble knobs to a moderate level. Ensure audio cables are securely connected. |
| Pouze jeden reproduktor má zvuk | Left speaker cable disconnected; Audio source outputting mono sound; Balance setting on computer/device. | Check the cable connecting the left speaker to the right speaker. Verify your audio source is set to stereo output. Check audio balance settings on your computer/device. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Tvůrčí |
| Číslo modelu | 51MF1610AA002 |
| Série | GigaWorks T20 Series II |
| Hmotnost položky | 1 libry |
| Rozměry produktu (DxŠxV) | 6.5 x 10 x 6.5 palce |
| Barva | 2.0 System with Glass Fiber Cone Driver and BasXPort Technology |
| Zdroj napájení | Elektrický kabel |
| Výrobce | Tvůrčí |
| Jazyk | Anglicky, francouzsky |
Záruka a podpora
This Creative Labs product is covered by a limited warranty provided by the manufacturer, Creative. Please refer to the Quick Start Guide included in your package or visit the official Creative webPodrobné záruční podmínky platné pro váš region naleznete na webových stránkách.
For further assistance, technical support, or to download the full user manual in PDF format, please visit the official Creative support page or refer to the user guide link provided:
Stáhnout oficiální uživatelskou příručku (PDF)
Manufacturer: Creative