Zavedení
The Bower SFD926N is an autofocus i-TTL power zoom flash unit designed for use with Nikon Digital SLR cameras. It features an auto-zoom flash head that adjusts to the camera's focal length, a built-in slave mode, and flexible tilt and swivel capabilities for comprehensive lighting control. This manual provides instructions for proper setup, operation, and maintenance of your flash unit.
Bezpečnostní opatření
- Do not attempt to disassemble or modify the flash unit. This can cause electric shock or damage the unit.
- Keep the flash unit away from water and moisture.
- Vyhněte se přímému vystavení očí blesku, zejména zblízka, protože může poškodit zrak.
- Používejte pouze uvedený typ baterií (4 baterie typu AA). Nekombinujte staré a nové baterie ani různé typy baterií.
- Remove batteries if the flash unit will not be used for an extended period.
Obsah balení
- Bower SFD926N Flash Unit
- Ochranné pouzdro (pokud je součástí balení)
- Mini Stand (if included)
- User Information Sheet (basic guide)
Nastavení
1. Instalace baterie
- Locate the battery compartment on the back of the flash unit.
- Otevřete kryt bateriového prostoru.
- Vložte čtyři (4) baterie typu AA a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
- Bezpečně zavřete kryt bateriového prostoru.
Obrázek 1: Zadní view of the SFD926N flash unit, illustrating the control panel and the location of the battery compartment.
2. Připojení k fotoaparátu
- Ujistěte se, že jsou fotoaparát i blesk vypnuté.
- Zasuňte upevňovací patku blesku do sáněk pro blesk fotoaparátu.
- Tighten the locking wheel or lever on the flash unit to secure it firmly to the camera.
Figure 2: The Bower SFD926N flash unit securely mounted on a Nikon DSLR camera's hot shoe.
Návod k obsluze
Zapnutí/vypnutí
- To power on, slide the ON/OFF switch to the "ON" position. The LCD display will illuminate.
- Chcete-li přístroj vypnout, přepněte vypínač do polohy „VYP“.
- The unit features an auto power-saving illuminated LCD display.
Provozní režimy
The SFD926N offers several operating modes:
- i-TTL (Through-The-Lens) Mode: This is the primary automatic exposure mode for Nikon cameras. The flash communicates with the camera to determine the optimal flash output. Ensure the flash is set to "ETTL" (or similar auto mode) and mounted on the camera's hot shoe.
- Manuální režim (M): Allows you to manually set the flash power output. Use the control buttons to adjust the power level (e.g., 1/1, 1/2, 1/4, etc.). This mode is useful for consistent lighting in studio setups or when off-camera.
- Slave Mode (S): The flash can be triggered wirelessly by another flash unit. Set the flash to "S" (Slave) mode. When another flash fires, the SFD926N will detect the light and fire simultaneously. This is useful for multi-flash setups without cables.
Adjusting Flash Head
The flash head can be adjusted for bounce flash photography:
- Náklon: The flash head can tilt upwards from 0° to 90°. This allows you to bounce light off ceilings for softer illumination.
- Otočný: The flash head can swivel horizontally from 0° to 270°. This allows you to bounce light off walls or adjust the direction of light when the flash is mounted on the camera.
Built-in Diffuser and Reflector Panel
- Širokoúhlý difuzor: Pull out the wide-angle diffuser panel from the flash head to spread the light for wider lens coverage.
- Reflektorový panel: Pull out the white reflector card from the flash head to create a catchlight in the subject's eyes or to provide a subtle fill light when bouncing the flash.
Synchronization Features
- Redukce červených očí: This feature helps minimize red-eye effect in portraits. Refer to your camera's manual for activating red-eye reduction flash mode.
- Front Curtain Synchronization: The flash fires immediately after the shutter opens. This is the standard flash mode.
- Rear Curtain Synchronization: The flash fires just before the shutter closes. This creates a natural-looking trail of light behind moving subjects. Refer to your camera's manual for activating rear curtain sync.
Údržba
- Čištění: K čištění blesku použijte měkký, suchý hadřík. V případě odolných nečistot jej lehce otřete.ampen the cloth with water and wipe gently. Do not use solvents or abrasive cleaners.
- Skladování: Store the flash unit in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for an extended period to prevent leakage.
- Péče o baterie: Vždy používejte nové, vysoce kvalitní AA baterie. Vyměňujte všechny čtyři baterie najednou.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Blesk se nespouští. |
|
|
| Flash fires inconsistently or stops firing after a few shots. |
|
|
| Flash unit does not charge or indicator lights do not illuminate. |
|
|
| Flimsy battery door. | Charakteristika designu. | Handle with care when opening and closing the battery compartment. |
Specifikace
| Model | SFD926N |
| Kompatibilita | Nikon Digital SLR Cameras (i-TTL compatible) |
| Směrné číslo | 112 feet (85mm @ ISO 100) |
| Rozsah zoomu | 24mm - 85mm (auto-zoom) |
| Režimy blesku | i-TTL, Manual, Slave |
| Bounce/Swivel | Tilt: 0° to 90°, Swivel: 0° to 270° |
| Zdroj napájení | 4 x AA baterie |
| Rozměry (cca) | 6.25 x 2.1 x 3 palce (15.9 x 5.3 x 7.6 cm) |
| Hmotnost (přibližně) | 9.6 unce (272 gramů) bez baterií |
| Speciální funkce | Auto power saving LCD, Built-in diffuser and reflector panel, Red-eye reduction, Front/Rear curtain sync. |
Záruka a podpora
Bower products typically come with a limited manufacturer's warranty. For specific warranty details, please refer to any documentation included with your purchase or visit the official Bower website. In case of technical issues or warranty claims, please contact Bower customer support through their official channels. Information regarding customer service contact details may be available on the manufacturer's webmísto.
Note: Some users have reported difficulty in finding direct customer service contact information. It is recommended to check the official Bower website for the most current support options.