Blackburn Mars 4.0

Blackburn Mars 4.0 Bicycle Taillight Instruction Manual

Model: Mars 4.0

1. Úvod

Děkuji za nákupasing the Blackburn Mars 4.0 Bicycle Taillight. This manual provides important information regarding the installation, operation, and maintenance of your new taillight. Please read this manual thoroughly before use and retain it for future reference.

Obsah balení:

  • Blackburn Mars 4.0 Taillight Unit
  • Mounting Bracket (for seatpost/seatstay or rack)
  • 2 x AAA baterie

2. Bezpečnostní informace

VAROVÁNÍ:

  • Always ensure the taillight is securely mounted before riding.
  • Do not look directly into the LED light as it can cause temporary vision impairment.
  • This taillight is designed to increase your visibility to others. It does not replace the need for safe cycling practices.
  • Replace batteries promptly when the light dims to maintain optimal visibility.
  • Použité baterie zlikvidujte zodpovědně v souladu s místními předpisy.

3. Nastavení

3.1 Instalace baterie

The Mars 4.0 taillight requires two AAA batteries (included). No tools are required for battery installation.

  1. Locate the battery compartment cover on the rear of the taillight unit.
  2. Jemně vypáčte kryt.
  3. Vložte dvě baterie typu AAA a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
  4. Kryt přihrádky na baterie bezpečně zavřete, dokud nezacvakne na místo.
Blackburn Mars 4.0 Taillight with battery compartment visible

Image: The Blackburn Mars 4.0 Taillight, showing its compact design and the location of the battery compartment on the rear. The red knob for mounting adjustment is also visible.

3.2 Mounting the Taillight

The Mars 4.0 features a versatile mounting system suitable for seatposts, seatstays, or racks.

  1. Připevněte montážní konzolu:
    • For seatpost/seatstay mounting: Use the adjustable strap to secure the bracket to your bicycle's seatpost or seatstay. Tighten the red knob until the bracket is firm and does not rotate.
    • For rack mounting: Utilize the provided rack adaptor (if applicable) to attach the bracket to your bicycle's rear rack.
  2. Insert the Taillight Unit: Slide the Mars 4.0 taillight unit onto the mounting bracket until it securely locks into place. Ensure the light faces directly backward.
  3. Upravit úhel: The light can be adjusted to face different angles by loosening the red knob, positioning the light, and then re-tightening the knob.

4. Návod k obsluze

The Mars 4.0 taillight has a single button for power and mode selection.

  1. Zapnutí: Press the power button once to turn on the light. It will typically start in steady mode.
  2. Změnit režimy: Press the power button repeatedly to cycle through the available lighting modes:
    • Steady (1 Watt Ultra Bright Red LED)
    • Flash (1 Watt Ultra Bright Red LED with 2 Amber Side LEDs)
  3. Vypnout: Press and hold the power button for approximately 2 seconds to turn off the light.

The taillight features a 1 Watt Ultra Bright Red LED and two amber side LEDs for enhanced visibility from multiple angles.

5. Údržba

5.1 Čištění

Wipe the taillight with a damp cloth to remove dirt and grime. Do not use abrasive cleaners or solvents, as these may damage the casing nebo objektiv.

5.2 Výměna baterie

When the light begins to dim or stops functioning, it is time to replace the batteries. Follow the "Battery Installation" steps in Section 3.1 to replace the two AAA batteries. Always replace both batteries at the same time with new ones.

POZNÁMKA:

Remove batteries if the light will not be used for an extended period to prevent leakage and potential damage to the unit.

6. Řešení problémů

  • Světlo se nerozsvítí:
    • Zkontrolujte, zda jsou baterie vloženy správně se správnou polaritou.
    • Vyměňte baterie za nové.
    • Ensure the battery compartment cover is fully closed.
  • Světlo je tlumené nebo bliká:
    • Batteries are low; replace them with new AAA batteries.
    • Check for corrosion in the battery compartment. Clean contacts if necessary.
  • Light detaches from bracket:
    • Ensure the light unit is fully slid onto the bracket until it locks.
    • Verify the mounting bracket is securely tightened to the bicycle.

7. Specifikace

Model:Mars 4.0
Světelný zdroj:1 Watt Ultra Bright Red LED, 2 Amber Side LEDs
Zdroj napájení:2 x AAA baterie (součástí balení)
Runtime (Steady):Přibližně 50 hodiny
Runtime (Flash):Přibližně 150 hodiny
Montáž:Versatile system with rack adaptor (seatpost, seatstay, rack)
Barva:Červený
Číslo dílu výrobce:2011369
UPC:768686788949

8. Záruka a podpora

Blackburn products are designed for durability and performance. For specific warranty information and support, please refer to the official Blackburn webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.

Pro další pomoc navštivte: www.blackburndesign.com

© 2023 Blackburn. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.