Blackmagic Design Mini Converter Sync Generator (CONVMSYNC) User Manual

1. Úvod

The Blackmagic Design Mini Converter Sync Generator (CONVMSYNC) is a compact device designed to generate stable synchronization signals for video equipment. It provides multiple reference outputs, allowing you to synchronize various devices in your broadcast or post-production workflow. This manual provides essential information for setting up, operating, and maintaining your Sync Generator.

2. Nastavení

2.1 Vybalení a kontrola

Carefully remove the Mini Converter Sync Generator from its packaging. Inspect the unit for any signs of damage during transit. If any damage is found, contact your reseller immediately.

2.2 Připojení napájení

Connect the included +12V DC power supply to the 'POWER +12V' input on the Mini Converter Sync Generator. Ensure the connection is secure. The device features a cable tie point to prevent accidental disconnection of power.

This image displays the Blackmagic Design Mini Converter Sync Generator, highlighting its compact design. On the front panel, the +12V power input is visible, along with six BNC 'REF OUT' connectors for distributing synchronization signals. The device name 'Mini Converter Sync Generator' is printed on the top surface.

2.3 Připojení k zařízením

Use BNC cables to connect the 'REF OUT' ports of the Sync Generator to the reference input ports of your video equipment (e.g., cameras, recorders, switchers). The Sync Generator provides six identical reference outputs.

2.4 Format Selection

The desired video synchronization format is selected using the eight dip switches located on the side of the unit. Refer to the 'FORMAT SELECTION TABLE' on the device itself or in the image below for the correct switch configuration for your required format (NTSC, PAL, 1080i, 1080psf, 720p).

This image shows the side of the Mini Converter Sync Generator, featuring eight dip switches labeled 1 through 8. Adjacent to the switches is a 'FORMAT SELECTION TABLE' which details the 'OFF = DOWN' and 'ON = UP' positions for each switch to select various video formats, including NTSC, PAL, 1080i/59.94, 1080i/50, 1080psf/23.98, 1080psf/24, 720p/59.94, and 720p/50. The table illustrates the specific dip switch configurations required for each format.

3. Návod k obsluze

3.1 Selecting a Sync Format

1. Identify the required synchronization format for your video equipment (e.g., NTSC, PAL, 1080i/59.94).
2. Locate the dip switches on the side of the Sync Generator.
3. Consult the 'FORMAT SELECTION TABLE' to determine the correct 'ON' (UP) or 'OFF' (DOWN) position for each of the eight dip switches.
4. Carefully adjust the dip switches using a small tool (e.g., a pen tip) to match the configuration for your chosen format.
5. Once the switches are set, the Sync Generator will output the selected reference signal on all 'REF OUT' ports.

For HD formats, the Sync Generator provides a tri-level sync signal, which is essential for accurate synchronization of high-definition video devices.

4. Údržba

4.1 Obecná péče

Keep the Mini Converter Sync Generator clean and free from dust. Use a soft, dry cloth for cleaning. Avoid exposing the unit to excessive moisture or extreme temperatures.

4.2 aktualizací firmwaru

Blackmagic Design periodically releases firmware updates to improve performance and add new features. These updates can be applied via the USB port on the device. Visit the official Blackmagic Design support website to download the latest drivers and utility software for your Mini Converter.

5. Řešení problémů

5.1 No Sync Signal Output

• Zkontrolujte napájení: Ensure the +12V power supply is securely connected and the unit is receiving power.
• Verify Dip Switch Settings: Double-check that the dip switches are correctly configured according to the 'FORMAT SELECTION TABLE' for your desired video standard. Incorrect settings can lead to no or an unusable sync signal.
• Připojení kabelů: Ensure all BNC cables are properly connected between the Sync Generator and your equipment.

5.2 Incorrect Sync or Unstable Signal

• Format Mismatch: Confirm that the selected sync format on the Mini Converter matches the expected reference input format of your connected devices.
• Kompatibilita zařízení: Some devices may have specific requirements for tri-level sync or black burst. Refer to your connected equipment's manual.
• Aktualizace firmware: Ensure your Mini Converter has the latest firmware installed.

5.3 Difficulty with 24p Sync

Some users have reported challenges achieving stable 24p synchronization. While the device supports 1080psf/23.98 and 1080psf/24, ensure your cameras or other devices are capable of accepting and correctly interpreting these specific tri-level sync signals. If issues persist, consult Blackmagic Design technical support.

6. Specifikace

7. Záruka a podpora

7.1 Technická podpora

For technical assistance, questions regarding specifications, or to report initial defects, please contact Blackmagic Design Technical Support directly. It is recommended to visit the official Blackmagic Design website for the most up-to-date support information, drivers, and manuals.

Blackmagic Design Technical Support:

• E-mail: support-jp@blackmagicdesign.com
• Telefon: 03-5465-2102 (Japan support direct)

Please note that contact information may vary by region. Always refer to the official Blackmagic Design website for the most accurate and localized support details.