Broan-NuTone 353 Gable Mount Attic and Garage Ventilation Fan User Manual

1. Konec produktuview

The Broan-NuTone 353 Powered Attic and Garage Ventilation Fan is designed to prevent heat and moisture buildup in attics and garages. Proper ventilation helps maintain a cooler, drier environment, which can extend the lifespan of your roof and air conditioning system, while also reducing energy costs. This fan is suitable for ventilating one, two, or three-car garages, whether attached or detached from the home, effectively combating heat, humidity, and unwanted odors.

Mezi klíčové vlastnosti patří:

• Gable Mount Installation: Specifically designed for gable installation, requiring permanent electrical wiring and grounding. Extension cords must not be used.
• Efektivní provoz: Delivers 760 Cubic Feet Per Minute (CFM) of airflow. Features a precision-balanced 14-inch metal blade for maximum air movement.
• Odolná konstrukce: Constructed with galvanized steel housing for enhanced strength and longevity.
• Automatické ovládání: Equipped with an adjustable, built-in thermostat for automatic operation based on temperature.
• Rozměry: Housing measures 15 inches in diameter and 8 inches deep, with a 14-inch diameter steel blade.

Image 1.1: Broan-NuTone 353 Gable Mount Attic and Garage Ventilation Fan. This image shows the complete fan unit, highlighting its robust construction and blade design.

2. Bezpečnostní informace

VAROVÁNÍ: Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, dodržujte následující:

• Instalační práce a elektrické vedení musí být provedeny kvalifikovanou osobou (osobami) v souladu se všemi platnými předpisy a normami, včetně protipožárních stavebních předpisů a norem.
• Always disconnect power at the service panel before wiring or servicing the unit.
• This unit requires permanent electrical wiring and grounding. Do not use with an electrical extension cord.
• This product is intended for gable installation only.
• Upozornění Kalifornie Proposition 65: Tento produkt může obsahovat chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu, vrozené vady nebo jiné reprodukční poškození.

3. Nastavení a instalace

Proper installation is crucial for the efficient and safe operation of your Broan-NuTone 353 fan. This fan is designed for gable mounting. Ensure you have adequate soffit ventilation to allow for proper airflow.

3.1. Předinstalační aspekty

• Požadavky na ventilaci: Calculate the required Cubic Feet Per Minute (CFM) for your attic or garage. A general guideline is to multiply the attic volume (Length x Width x Height) by 10 air changes per hour, then divide by 60 minutes/hour to get CFM. Ensure sufficient soffit vent area (approximately 0.48 square inches per CFM).
• Elektrické vedení: The fan requires permanent 120-volt AC electrical wiring and proper grounding. Consult a qualified electrician if you are unsure about electrical connections.
• Místo montáže: Identify a suitable gable vent opening. The fan housing is 15 inches in diameter.

Image 3.1: Ventilation Calculation Guide. This image provides a step-by-step guide to calculate the recommended CFM and minimum soffit vent area for effective ventilation.

3.2. Montáž ventilátoru

The fan is typically mounted to a wooden frame constructed around the gable vent opening. This frame provides a secure and stable base for the fan.

1. Prepare the Mounting Board: Cut a piece of plywood (e.g., 21 inches square) to fit securely within the gable vent framing. Trace the fan's duct shape onto the plywood and cut out the opening.
2. Pre-wire the Fan: Before mounting, connect 14/2 electrical wire to the fan's junction box. This makes wiring easier than doing it in a confined attic space.
3. Secure the Fan to the Board: Center the fan on the prepared plywood board. Use 1/2-inch wood screws for the inner mounting holes and 1 1/2-inch wood screws for the outermost holes, ensuring they penetrate into the studs of the frame.
4. Install the Assembly: Position the fan and plywood assembly into the gable vent opening. Secure it to the existing attic framing (e.g., 2x4s) using screws. Start with a few screws to support the unit, then add more to ensure it is very secure.
5. Run Electrical Wiring: Route the electrical wire from the fan along the attic ridge to your power source (e.g., an existing outlet converted to a switch). Secure the wire with tacks every few feet.
6. Připojení k napájení: Wire the fan to a dedicated switch or power source according to local electrical codes.

Image 3.2: Gable Mount Fan Installation. This image illustrates the Broan 353 fan mounted within a wooden frame in a gable vent opening, showing the electrical connection box.

Image 3.3: Fan Blade and Housing Dimensions. This image provides a visual reference for the fan's dimensions, including the 16-inch overall diameter and 14-inch blade.

4. Návod k obsluze

The Broan-NuTone 353 fan operates automatically via its built-in adjustable thermostat.

1. Zapnutí: Ensure the fan is connected to a permanent power source and the wall switch (if installed) is in the "ON" position.
2. Nastavení termostatu: The thermostat is located within the fan shroud. It controls when the fan activates based on the attic or garage temperature.
   • To adjust the temperature setting, access the thermostat and rotate the dial to your desired activation temperature.
   • Consider that the thermostat inside the shroud may register a slightly lower temperature than the overall attic temperature due to its proximity to the gable vent and airflow. You may need to set it lower than your desired attic temperature to achieve optimal operation.
   • Common settings range from 90°F to 110°F (32°C to 43°C).
3. Automatický provoz: Once set, the fan will automatically turn on when the temperature at the thermostat reaches the set point and turn off when the temperature drops below it.

5. Údržba

Regular maintenance helps ensure the longevity and efficient operation of your ventilation fan.

• Roční kontrola: Annually, or more frequently in dusty environments, inspect the fan blades and motor for dust and debris buildup.
• Čištění: Disconnect power to the fan at the circuit breaker before cleaning. Use a soft cloth or brush to gently remove any accumulated dust or dirt from the blades and motor housing. Do not use water or liquid cleaners directly on electrical components.
• Zkontrolujte překážky: Ensure the gable vent opening and fan blades are free from obstructions such as bird nests, leaves, or other debris.
• Mazání motoru: The fan motor is typically permanently lubricated and does not require additional oiling. Refer to the motor's specific instructions if available.

6. Řešení problémů

If your Broan-NuTone 353 fan is not operating as expected, refer to the following common issues and solutions:

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please contact Broan-NuTone customer service or visit their official webUschovejte si účtenku jako doklad o koupi pro případ reklamace.

Broan-NuTone Official Webmísto: www.broan-nutone.com