UPG UB1250

UPG UB1250 12V 5AH Sealed Lead Acid Battery Instruction Manual

Model: UB1250 | Brand: UPG

1. Přesview

The UPG UB1250 is a 12V 5AH Sealed Lead Acid (SLA) battery designed for reliable power delivery across various applications. Manufactured with high-quality components, this non-spillable battery is compatible with original equipment in diverse systems. Its robust design ensures consistent performance for critical functions.

Mezi běžné aplikace patří:

  • Lékařská zařízení
  • Nouzové osvětlení
  • Mobility scooters and devices
  • Bezpečnostní systémy
  • Nepřerušitelné zdroje napájení (UPS)

2. Nastavení a instalace

Before installation, ensure the battery's specifications (voltage, amperage, and dimensions) match the requirements of your device. Always refer to your equipment's specific instruction manual for detailed installation procedures. Handle the battery with care to prevent damage to terminals or casing.

2.1. Fyzické rozměry

Verify the physical fit of the UB1250 battery in your equipment. The approximate dimensions are 3.54 inches (D) x 2.76 inches (W) x 4.21 inches (H).

UPG UB1250 battery with dimensions labeled
Image 1: UPG UB1250 battery showing its length (3.54in), width (2.76in), and height (3.98in, which is approximately 4.21in including terminals).

2.2. Připojení terminálu

Connect the battery terminals according to your device's wiring diagram. Typically, the red terminal is positive (+) and the black terminal is negative (-). Ensure connections are secure to prevent arcing or poor performance. Nezkratujte svorky.

2.3. Installation Guidance Video

For a visual guide on general sealed lead acid battery installation, please watch the following video. Note that specific steps may vary based on your equipment model.

Video 1: A seller-provided video titled 'What You Should Know - UB1250 Sealed Lead Acid Batteries' offering general information and installation tips for the UB1250 battery.

3. Návod k obsluze

The UPG UB1250 battery is designed for both standby and cyclic use. It is a maintenance-free, non-spillable battery, meaning it does not require water replenishment.

3.1. Nabíjení

Always use a charger compatible with 12V sealed lead acid batteries. Overcharging or undercharging can significantly reduce battery life. Refer to the battery's label or datasheet for specific voltage regulation and initial current recommendations.

UPG UB1250 battery label with charging specifications
Image 2: Close-up of the UPG UB1250 battery label, detailing constant voltage charge at 20°C for standby use (13.6-13.8V) and cyclic use (14.6-14.8V), with initial current less than 1.5A.

3.2. Vybíjení

Avoid total discharging (deep discharge) as this can permanently damage the battery. For optimal lifespan, avoid discharging below recommended levels. The battery is designed to provide 5 Amp-hours of capacity.

4. Údržba

While the UB1250 is a maintenance-free battery, regular checks can help ensure its longevity and optimal performance.

  • Vizuální kontrola: Periodically inspect the battery for any signs of physical damage, cracks, or swelling. Ensure terminals are clean and free of corrosion.
  • svtage Zkontrolujte: Occasionally check the battery's voltage with a multimeter to ensure it is within the recommended range (e.g., 12.8V-13.2V for a fully charged 12V battery).
  • Skladování: When storing the battery for extended periods, ensure it is fully charged and stored in a cool, dry place. Avoid storing it in direct sunlight or areas with extreme temperatures (above 65°C or below -15°C).
  • Nahrazení: It is recommended to replace the battery every 3-5 years, or sooner if performance degrades significantly.

5. Řešení problémů

If you experience issues with your UPG UB1250 battery, consider the following:

  • Baterie neudrží nabití: This could indicate an aging battery, a faulty charger, or excessive discharge. Test the charger's output voltage and consider replacing the battery if it's old.
  • Nízký objemtage Výstup: Check all connections for looseness or corrosion. Ensure the battery is fully charged. If the issue persists, the battery may be at the end of its lifespan.
  • Swollen Casing: A swollen battery casing is a sign of internal damage, often due to overcharging or overheating. Discontinue use immediately and replace the battery.
  • Zařízení se nezapíná: Verify that the battery is correctly installed and fully charged. Check the device's fuses or circuit breakers.

6. Specifikace

Detailed technical specifications for the UPG UB1250 12V 5AH Sealed Lead Acid Battery:

SpecifikaceHodnota
ZnačkaUPG
Číslo modelu85983 / D5741
svtage12 voltů
Kapacita baterie5 Amp Hodiny (5 Ah)
Složení článků baterieOlověná kyselina
Rozměry produktu (D x Š x V)3.54"H x 2.76"Š x 4.21"V
Hmotnost položky448 gramů (přibližně 0.99 libry)
VýrobceUPGI
Zahrnuté komponentyBaterie

6.1. Detailed Datasheet

For comprehensive technical data, including discharge characteristics, shelf life, and temperature effects, please refer to the manufacturer's datasheets:

UPG UB1250 battery datasheet page 1
Image 3: UPG UB1250 battery datasheet, page 1, showing nominal capacity, internal resistance, temperature dependency, charge methods, and physical dimensions.
UPG UB1250 battery datasheet page 2
Image 4: UPG UB1250 battery datasheet, page 2, illustrating shelf life vs. storage, cycle life vs. depth of discharge, open circuit voltage vs. residual capacity, and effect of temperature on capacity.

7. Záruka

The UPG UB1250 battery comes with a jednoletá záruka from Advanced Battery Systems, Inc. Please retain your proof of purchase for warranty claims.

8. Podpora

For further assistance, technical support, or warranty inquiries, please contact the manufacturer or your point of purchase. Always ensure proper disposal of old batteries by contacting your local government or waste management company for hazardous material regulations.