Uživatelská příručka k multimediálním reproduktorům Edifier HCS2330 C2-Plus 2.1

Zavedení

This manual provides essential information for the proper setup, operation, and maintenance of your Edifier HCS2330 C2-Plus 2.1 Multimedia Speaker System. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

The Edifier C2 Plus is a 2.1 multimedia system featuring Edifier Intelligent Distortion Control (IDC) technology to manage input overload and prevent audio distortion. It includes an independent amplifier, two wooden enclosed satellite speakers, and a 6.5-inch magnetically shielded subwoofer for deep and powerful bass. The system supports dual audio line-in connections and includes a digital display panel and a built-in headphone jack on the amplifier. A remote control is provided for convenient operation.

Obsah balení

• Subwoofer Unit
• Satelitní reproduktory (2 jednotky)
• Externí AmpLifikační jednotka
• Dálkové ovládání
• Audio Connection Cables (RCA to 3.5mm, RCA to RCA)
• Uživatelská příručka (tento dokument)

Nastavení

1. Vybalení a umístění

Carefully remove all components from the packaging. Place the subwoofer on a stable surface, preferably on the floor, to maximize bass response. Position the satellite speakers on either side of your listening area, ensuring they are equidistant from the listener for optimal stereo imaging. Place the external amplifier unit within easy reach, as it houses the controls and connections.

Obrázek 1: Přesview of the Edifier HCS2330 C2-Plus 2.1 Multimedia Speaker System components.

2. Zapojení komponent

1. Connect Satellite Speakers to Ampživější: Connect the cables from the satellite speakers to the corresponding "Speaker Out" ports on the rear of the external amplifier unit. Ensure correct polarity (red to red, black to black).
2. Connect Subwoofer to Ampživější: Connect the subwoofer cable to the "Subwoofer Out" port on the rear of the external ampživější jednotka.
3. Connect Audio Source to Ampživější:
   • Použití kabelů RCA: Connect your audio source (e.g., TV, DVD player) to the "Line In 1" or "Line In 2" RCA ports on the amplifier using the provided RCA to RCA cable.
   • Using 3.5mm Jack: For devices with a 3.5mm headphone jack (e.g., computer, smartphone), use the provided 3.5mm to RCA cable to connect to either "Line In 1" or "Line In 2" RCA ports.
4. Připojte napájení: Plug the power cord from the external amplifier unit into a standard wall outlet.

Návod k obsluze

1. Zapnutí/vypnutí

Press the power button on the front panel of the external amplifier unit or on the remote control to turn the system on or off. The digital display will illuminate when the system is powered on.

2. Výběr vstupu

Press the "Input" button on the front panel or the remote control to cycle between "Line In 1" and "Line In 2" audio sources. Select the input corresponding to your connected device.

3. Ovládání hlasitosti

Rotate the large knob on the front panel of the amplifier or use the "Volume +" and "Volume -" buttons on the remote control to adjust the overall volume level. The current volume level will be shown on the digital display.

4. Nastavení basů a výšek

Press the "Bass" or "Treble" buttons on the remote control, then use the "Volume +" and "Volume -" buttons to adjust the respective levels. The adjusted level will be displayed temporarily.

5. Funkce ztlumení

Press the "Mute" button on the remote control to temporarily silence the audio output. Press it again to resume playback.

6. Headphone Jack Usage

A 3.5mm headphone jack is located on the front panel of the amplifier. Plugging in headphones will automatically mute the speaker output, allowing for private listening.

Údržba

1. Čištění

To clean the speaker system, gently wipe surfaces with a soft, dry cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these may damage the finish or internal components. Ensure the system is powered off and unplugged before cleaning.

2. Skladování

If storing the system for an extended period, disconnect all cables and store the components in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for protection during storage or transport.

Odstraňování problémů

Specifikace

Název modelu:

HCS2330

Typ reproduktoru:

Subwoofer (System includes satellites)

Konfigurace kanálu prostorového zvuku:

2.1

Wattage (RMS):

53 wattů

Maximální výstupní výkon reproduktoru:

60 wattů

Poměr signál-šum:

85 dB

Velikost reproduktoru subwoofer:

6.5 palce

Průměr výškového reproduktoru:

1 palce

Technologie připojení:

Kabelové

Protokol připojení:

Aux, RCA

Kompatibilní zařízení:

Laptops, Televisions, Desktops, Projectors, Home Theaters

Rozměry položky (DxŠxV):

30.3 x 41 x 38 centimetrů

Hmotnost položky:

7.3 kg

Záruka a podpora

Informace o záruce

The Edifier HCS2330 C2-Plus Multimedia Speaker System comes with a 1letá záruční doba od data nákupu. Uschovejte si prosím doklad o koupi pro případné reklamace.

Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Edifier customer support. Refer to the official Edifier webNejnovější kontaktní informace naleznete na webových stránkách nebo na obalu produktu.