Uživatelská příručka k ultramobilnímu širokoúhlému DLP projektoru InFocus IN1102

Zavedení

This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.

The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.

Co je v krabici

Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:

• InFocus IN1102 Projector
• Napájecí kabel
• Navigator II Remote
• USB (A to mini-B) Cable
• VGA kabel
• Pouzdro na přenášení

Konec produktuview

Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.

Obrázek 1: Přední strana View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.

Obrázek 2: Přední strana View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.

Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.

Figure 4: Top Panel and Control Keypad. Tento obrázek nabízí pohled shora dolů view of the projector, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.

Obrázek 5: Úhlové View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.

Nastavení

1. Umístění: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
2. Připojení napájení: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
3. Connecting a Source:
   • DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
   • VGA: Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
   • Video vstupy: For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
4. Zapnutí: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
5. Nastavení zaostření: Rotate the focus ring on the projector lens until the projected image is sharp and clear.

Návod k obsluze

Powering On/Off (LiteSwitch™)

The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.

Using the LiteTouch™ Keypad

The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:

• Vypínač: Slouží k zapnutí nebo vypnutí projektoru.
• Automatický obrázek: Automatically optimizes the image settings for the current input source.
• Základní kameny: Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
• Menu: Přístup k nabídce OSD (On-Screen Display) pro pokročilá nastavení.
• Vybrat: Potvrzuje výběry v nabídce OSD.
• Objem: Nastavuje výstupní úroveň zvuku.
• Zdroj: Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).

DisplayLink™ Connectivity

When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.

Image Orientation for Mounting

The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.

Údržba

Čištění projektoru

• Vnější: Použijte měkký hadřík, který nepouští vlákna dampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. Avoid harsh chemicals.
• Čočka: Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.

Design bez filtrů

The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.

Odstraňování problémů

Pokud se s projektorem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:

• Není zobrazen žádný obrázek:
  • Ujistěte se, že je projektor zapnutý aamp je osvětlená.
  • Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
  • Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
  • Check your computer's display settings to ensure the external display is enabled or duplicated.
• Obrázek je rozmazaný:
  • Upravte zaostřovací kroužek na objektivu projektoru.
  • Ujistěte se, že projekční plocha je rovná a projektor je v dostatečné vzdálenosti.
• Image is Trapezoidal (Wider at Top/Bottom):
  • Use the "Keystone" adjustment on the control panel to correct the image shape.
  • Ideally, position the projector perpendicular to the screen to minimize keystone correction.
• Žádný zvuk:
  • Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
  • Adjust the volume using the projector's controls or the remote.
  • Zkontrolujte nastavení zvukového výstupu na zdrojovém zařízení.

For further assistance, please refer to the InFocus support webnebo kontaktujte zákaznický servis.

Specifikace

Key technical specifications for the InFocus IN1102 projector:

Záruka a podpora

The InFocus IN1102 projector comes with the following limited warranty:

• Části: 5 roky
• Práce: 2 roky
• Lamp: 6 měsíců

For warranty claims, technical support, or additional product information, please visit the official InFocus webnebo se obraťte na jejich zákaznické oddělení. Uschovejte si účtenku jako doklad o koupi pro ověření záruky.