Návod k obsluze baterie Yuasa YUAM72H4A YTX14AH aktivované výrobcem řady H AGM

1. Konec produktuview

The Yuasa YTX H Series AGM Battery (Model YUAM72H4A) is a high-performance, factory-activated battery designed for various applications requiring reliable power. This battery features advanced lead-calcium technology, which allows it to maintain its specific gravity significantly longer than conventional lead-antimony batteries. Its Absorbed Glass Mat (AGM) separators absorb the electrolyte, making the battery non-spillable. The valve-regulated design eliminates water loss, removing the need for refilling. This battery is factory-activated, meaning it is pre-filled with electrolyte, sealed, and charged at the factory, ready for immediate use.

Mezi klíčové vlastnosti patří:

• Up to 30% more cold cranking amps for increased power.
• Advanced lead-calcium technology for extended charge retention.
• Absorbed Glass Mat (AGM) separators for a non-spillable design.
• Valve-regulated design eliminates water loss and maintenance.
• Factory Activated (FA) for immediate use upon purchase.

Figure 1: Yuasa YUAM72H4A YTX14AH Factory Activated H Series AGM Battery. This image displays the top and front of the battery, showing the positive and negative terminals, the Yuasa branding, and key specifications printed on the label. Included are the terminal screws and nuts for installation.

2. Bezpečnostní informace

Always prioritize safety when handling batteries. Failure to follow these instructions can result in serious injury or property damage.

• NEBEZPEČÍ/JED: This battery contains sulfuric acid, which can cause blindness or severe burns upon contact.
• OCHRANA OČÍ: Při práci s bateriemi vždy používejte vhodnou ochranu očí (ochranné brýle).
• EXPLOSIVE GASES: Batteries produce explosive gases. Keep sparks, flames, and smoking materials away from the battery. Ensure adequate ventilation.
• UCHOVÁVEJTE MIMO DOSAH DĚTÍ: Store batteries in a secure location inaccessible to children.
• PRVNÍ POMOC: In case of contact with acid, flush eyes immediately with water for at least 15 minutes and seek medical help fast. For skin contact, wash thoroughly with soap and water.
• INSTALACE: Read the complete instruction manual carefully before installation or use.
• LIKVIDACE: Do not dispose of batteries in household waste. Recycle properly at an authorized facility.

3. Nastavení a instalace

The Yuasa YUAM72H4A battery is Factory Activated (FA), meaning it comes pre-filled, sealed, and charged, ready for installation. No initial electrolyte filling or charging is required.

3.1 Příprava na instalaci

1. Ujistěte se, že je zapalování vozidla vypnuté a klíč je vytažen.
2. Vyhledejte stávající baterii ve vašem vozidle.
3. Používejte vhodné bezpečnostní pomůcky, včetně ochrany očí a rukavic.

3.2 Removing the Old Battery

1. Disconnect the negative (-) terminal first, followed by the positive (+) terminal.
2. Carefully remove any battery hold-down straps or clamps.
3. Lift the old battery out of its compartment. Be mindful of its weight.
4. Inspect the battery tray and cables for corrosion or damage. Clean as necessary.

3.3 Installing the New Battery

1. Place the new Yuasa YUAM72H4A battery into the battery compartment. Ensure it sits securely.
2. Secure the battery with any hold-down straps or clamps.
3. Nejprve připojte kladný (+) pól a poté záporný (-) pól. Ujistěte se, že jsou spoje pevné.
4. Apply a thin coat of dielectric grease to the terminals to prevent corrosion.

4. Návod k obsluze

Once installed, the Yuasa YUAM72H4A battery is ready to power your vehicle. Ensure all electrical connections are secure before starting the engine.

• The battery provides 12 volts of power for starting and operating vehicle electronics.
• Avoid excessive discharge, as this can shorten battery life.
• If the vehicle is not used for extended periods, consider using a trickle charger to maintain the battery's charge.

5. Údržba

While the Yuasa YTX H Series AGM battery is maintenance-free in terms of electrolyte refilling, regular checks can extend its lifespan and ensure optimal performance.

• Inspekce terminálu: Periodically check battery terminals for cleanliness and tightness. Clean any corrosion with a wire brush and baking soda solution, then rinse with water and dry thoroughly.
• Pouzdro na baterii: Udržujte pouzdro baterie čisté a suché. Zkontrolujte, zda nevykazuje známky poškození nebo prasklin.
• Nabíjení: If the vehicle is stored or used infrequently, connect the battery to a suitable battery maintainer or trickle charger to prevent self-discharge. This helps prolong battery life.
• Skladování: When storing the battery for long periods, ensure it is fully charged and stored in a cool, dry place. Recharge every 3-6 months if not connected to a maintainer.

6. Řešení problémů

If you encounter issues with your Yuasa YUAM72H4A battery, consider the following common troubleshooting steps:

• Motor se protáčí pomalu nebo vůbec ne: To často signalizuje nízký stav nabití baterie. Zkontrolujte hlasitost baterie.tage with a multimeter. If below 12.4V, recharge the battery. Also, inspect terminals for corrosion and ensure they are tightly connected.
• Světla ztlumují nebo blikají: Similar to slow cranking, this suggests a low battery charge or poor connections. Verify voltage and terminal integrity.
• Baterie neudrží nabití: After charging, if the battery quickly loses its charge, it might be due to a parasitic drain in the vehicle's electrical system or the battery has reached the end of its service life. Consult a professional for parasitic drain diagnosis.
• Oteklý kryt baterie: A swollen battery case indicates overcharging or internal damage. Discontinue use immediately and replace the battery.

For persistent issues, consult a qualified technician or contact Yuasa customer support.

7. Specifikace

8. Informace o záruce

For specific warranty details regarding your Yuasa YUAM72H4A battery, please refer to the warranty card included with your product or visit the official Yuasa website. Warranty coverage typically includes defects in materials and workmanship under normal use and service conditions.

9. Podpora

If you require further assistance, have questions about your battery, or need technical support, please contact Yuasa customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your battery model number (YUAM72H4A) and purchase details readily available.