AT&T 1856

AT&T 1856 Corded Speakerphone with Digital Answering System

Model: 1856 Uživatelská příručka

Zavedení

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your AT&T 1856 Corded Speakerphone with Digital Answering System. Please read this manual thoroughly before using your new telephone to ensure proper functionality and to take full advantagjeho funkcí. Uschovejte si tuto příručku pro budoucí použití.

Důležité bezpečnostní informace

Při používání vašeho telefonního zařízení je třeba vždy dodržovat základní bezpečnostní opatření, aby se snížilo riziko požáru, úrazu elektrickým proudem a zranění osob, včetně následujících:

  • Přečtěte si a pochopte všechny pokyny.
  • Dodržujte všechna varování a pokyny vyznačené na výrobku.
  • Před čištěním odpojte tento výrobek ze zásuvky. Nepoužívejte tekuté čističe nebo aerosolové čističe. Použijte reklamuamp hadřík na čištění.
  • Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
  • Neumisťujte tento výrobek na nestabilní vozík, stojan nebo stůl. Výrobek může spadnout a způsobit vážné poškození výrobku.
  • Avoid placing the telephone in areas with extreme temperatures, direct sunlight, or other heat-producing appliances.
  • Tento výrobek by měl být napájen pouze z typu zdroje energie uvedeného na štítku. Pokud si nejste jisti typem napájení vašeho domova, obraťte se na svého prodejce nebo místní energetickou společnost.
  • Nenechávejte nic ležet na napájecím kabelu. Neumisťujte tento výrobek tam, kde by byl kabel zneužíván osobami, které po něm chodí.
  • Never push objects of any kind into this product through the slots in the cabinet as they may touch dangerous voltage body nebo zkratujte části, které by mohly vést k riziku požáru nebo úrazu elektrickým proudem. Nikdy na výrobek nelijte žádné tekutiny.
  • To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified service facility when service or repair work is required. Opening or removing covers may expose you to dangerous voltages nebo jiná rizika. Nesprávná zpětná montáž může způsobit úraz elektrickým proudem při následném použití produktu.
  • Za následujících podmínek odpojte tento produkt ze zásuvky a svěřte opravu kvalifikovanému servisnímu personálu:
    • Když je napájecí kabel nebo zástrčka poškozená nebo roztřepená.
    • Pokud se do produktu dostala tekutina.
    • Pokud byl výrobek vystaven dešti nebo vodě.
    • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
    • Pokud produkt spadl nebo byla poškozena skříň.
    • Pokud produkt vykazuje výraznou změnu výkonu.

Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

  • AT&T 1856 Corded Speakerphone with Digital Answering System
  • Sluchátko
  • Svinutý kabel sluchátka
  • Kabel telefonní linky
  • Napájecí adaptér
  • Držák pro montáž na stěnu (volitelný)
  • Uživatelská příručka (tento dokument)

Nastavení

Follow these steps to set up your AT&T 1856 telephone:

AT&T 1856 Corded Speakerphone with Digital Answering System

Přední view of the AT&T 1856 phone, showing the handset, keypad, LCD display, and various function buttons. The speaker button is illuminated in pink, indicating it is active.

1. Connect the Handset

  1. Plug one end of the coiled handset cord into the jack on the bottom left side of the telephone base.
  2. Plug the other end of the coiled handset cord into the jack on the bottom of the handset.

2. Connect the Telephone Line Cord

  1. Plug one end of the telephone line cord into the TEL LINE jack on the back of the telephone base.
  2. Zapojte druhý konec telefonního kabelu do telefonní zásuvky ve zdi.

3. Connect the AC Power Adapter

  1. Plug the small end of the AC power adapter into the DC IN 9V jack on the back of the telephone base.
  2. Plug the large end of the AC power adapter into a standard electrical wall outlet.
  3. Ensure the power adapter is securely plugged in. The phone requires an electrical outlet for full functionality, including the digital answering system.

4. Počáteční nastavení a nastavení hodin

Při prvním zapnutí nebo po výpadku napájenítage, the display may prompt you to set the clock. Refer to the "Clock Reset" button and the "DISPLAY/DIAL" and "CID" navigation buttons for setting the time and date.

Základní operace

Uskutečnění hovoru

  • Zvedněte sluchátko nebo stiskněte tlačítko REPRODUKTOR tlačítko.
  • Vytočte požadované telefonní číslo pomocí klávesnice.
  • To redial the last number, press the OPAKOVÁNÍ tlačítko.

Přijetí hovoru

  • Když telefon zvoní, zvedněte sluchátko nebo stiskněte REPRODUKTOR tlačítko.

Ukončení hovoru

  • Pokud používáte sluchátko, vložte ho zpět do kolébky.
  • If using the speakerphone, press the REPRODUKTOR znovu tlačítko.

Nastavení hlasitosti

  • Během hovoru použijte OBJEM button (rocker switch) on the right side of the phone to adjust the listening volume.

Funkce ztlumení

  • Během hovoru stiskněte ZTLUMIT button to temporarily silence your microphone. The other party will not hear you.
  • Stiskněte ZTLUMIT znovu pro obnovení konverzace.

Digital Answering System (DAS)

The AT&T 1856 features an all-digital answering system with approximately 19 minutes of recording time, including announcements and incoming messages. It also includes Message Guard technology to protect messages during power outages.

Setting Up Your Answering System

  • Stiskněte tlačítko TAS SETUP button (located on the left side, above CID SETUP).
  • Follow the voice prompts to record your outgoing announcement and set the number of rings.

Přehrávání zpráv

  • Stiskněte tlačítko PLAY/STOP button (circular button on the top right of the keypad).
  • Použijte PŘESKOČIT (forward arrow) and OPAKOVAT (backward arrow) buttons to navigate messages.
  • Stiskněte VYMAZAT to erase the current message.

Prověřování hovorů

While an incoming message is being recorded, you can listen to the caller's message through the speaker. If you wish to speak to the caller, simply lift the handset or press the REPRODUKTOR tlačítko.

Funkce ID volajícího

This phone is Caller ID and Call Waiting capable, requiring subscription to these services from your local telephone company.

Viewing Caller ID History

  • When the phone is idle, press the CID ▲ or CID ▼ tlačítky pro procházení protokolu ID volajícího.
  • The display shows the caller's name and number (if available).
  • A NOVÉ VOLÁNÍ indicator light will illuminate when new calls are received.

Dialing from Caller ID Log

  • Zatímco viewing a Caller ID entry, press DISPLEJ/VOLIČ vytočit zobrazené číslo.

Deleting Caller ID Entries

  • Zatímco viewing a Caller ID entry, press the ODSTRANIT tlačítko pro jeho odstranění.

Memory and Speed Dial

The phone features three one-touch memory buttons (M1, M2, M3) and a 9-number speed dial.

Programming One-Touch Memory Buttons (M1, M2, M3)

  1. Stiskněte tlačítko PROG/MEM tlačítko.
  2. Enter the phone number you wish to store (up to 24 digits).
  3. Press the desired memory button (M1, M2nebo M3).
  4. A confirmation tone will sound.

Using One-Touch Memory Buttons

  • Zvedněte sluchátko nebo stiskněte REPRODUKTOR.
  • Press the desired memory button (M1, M2nebo M3). The stored number will be dialed automatically.

Programming Speed Dial Numbers (0-9)

  1. Stiskněte tlačítko PROG/MEM tlačítko.
  2. Enter the phone number you wish to store.
  3. Press the desired keypad digit (0-9) to assign it as a speed dial location.
  4. A confirmation tone will sound.

Using Speed Dial Numbers

  • Zvedněte sluchátko nebo stiskněte REPRODUKTOR.
  • Stiskněte tlačítko PROG/MEM button, then the desired speed dial digit (0-9). The stored number will be dialed.

Údržba

To keep your telephone clean and in good condition:

  • Wipe the telephone with a soft, slightly damp tkanina.
  • Do not use harsh cleaning agents or abrasive materials.
  • Nestříkejte tekutiny přímo na telefon.

Odstraňování problémů

If you experience issues with your AT&T 1856 phone, refer to the table below for common problems and solutions.

ProblémŘešení
Žádný oznamovací tón.
  • Ujistěte se, že je telefonní kabel bezpečně zapojený do telefonu i do zásuvky ve zdi.
  • Zkontrolujte, zda fungují i ​​ostatní telefony na stejné lince.
  • Try plugging the phone into a different wall jack.
Digital Answering System (DAS) not recording messages.
  • Ensure the AC power adapter is properly connected and the phone has power. The DAS requires power to operate.
  • Check if the memory is full. Delete old messages to free up space.
  • Verify the answering system is turned on (refer to DAS setup instructions).
Nezobrazuje se ID volajícího.
  • Ensure you have subscribed to Caller ID service from your telephone service provider.
  • The display is not backlit; ensure adequate lighting to view na displeji.
Phone does not ring during a power outage.
  • While the phone can make/receive calls during a power outage (due to its corded nature), the digital ringer requires power. If you rely on the ringer, ensure power is available or use another phone with a mechanical ringer.
Tlačítka nereagují nebo se zasekávají.
  • Clean the keypad with a soft, dry cloth. Avoid liquids near buttons.
  • If a specific button is consistently unresponsive, the unit may require service.

Specifikace

  • Model: AT&T 1856
  • Typ: Corded Speakerphone with Digital Answering System
  • Odpovídací systém: All-digital, 19 minutes recording capacity
  • Paměť: 3 one-touch memory buttons (M1, M2, M3), 9-number speed dial
  • ID volajícího: 50 name/number history (requires subscription)
  • Zobrazit: LCD with adjustable contrast
  • Moc: AC power adapter (operates during power failure for basic calls, DAS requires power)
  • Montáž: Možnost montáže na stůl nebo na stěnu
  • Rozměry (D x Š x V): 7.5 x 5 x 6.25 palce
  • Hmotnost: 1.5 libry

Záruka a podpora

AT&T products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your product or visit the official AT&T support webwebu. Uschovejte si účtenku jako doklad o koupi.

For further assistance, you may contact AT&T customer support directly. Contact details are typically available on the manufacturer's webmístě nebo na obalu produktu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.