Progress Lighting P832-TG Remodel Recessed Lighting Housing User Manual

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Progress Lighting P832-TG Remodel Recessed Lighting Housing. Designed for use in existing ceilings, this housing features an integral flange and exclusive locking bars for quick and secure mounting.

Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.

Bezpečnostní informace

VAROVÁNÍ: To avoid fire, shock, or death; always turn off power at the circuit breaker or fuse box before wiring. All wiring must be in accordance with national and local electrical codes.

• Always disconnect power before installing, servicing, or cleaning this fixture.
• Instalaci by měl provádět kvalifikovaný elektrikář.
• Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
• This product is UL and CUL listed for damp locations. Do not install in wet locations.
• Rated for 60-degree supply wires in end-of-run applications.
• Rated for 4 #12 90-degree conductors (2 in and 2 out).

Návrh 65 Varování: Tento produkt vás může vystavit chemikáliím, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.

Konec produktuview

The Progress Lighting P832-TG is a remodel recessed lighting housing designed for easy installation in existing ceilings. Its robust construction and thoughtful design ensure a secure fit and reliable performance.

Klíčové vlastnosti:

• Integral flange on housing for a clean finish.
• Exclusive locking bars for quick mounting in ceilings from 1/2-inch to 1-inch thick.
• UL and CUL listed for damp locations and through wiring.
• Rated for 4 #12 90-Degree conductors (2 in and 2 out).
• Medium base lamp zásuvka.

Komponenty:

The P832-TG housing consists of a galvanized steel junction box, a flexible conduit connecting to the housing, and the main housing unit with integral flange and locking bars. It is designed to accommodate a medium base lamp and requires a separate trim for a complete fixture.

Figure 1: Progress Lighting P832-TG Recessed Lighting Housing. This image shows the main housing unit, the junction box, and the flexible conduit connecting them.

Obrázek 2: Rozměry view of the P832-TG housing. Key dimensions include 11-3/8 inches width, 5-1/2 inches height, and 4-13/16 inches extension, with a 4-1/4 inch ceiling opening.

Nastavení a instalace

Follow these steps for proper installation of the P832-TG housing in existing ceilings. Ensure power is disconnected at the circuit breaker before proceeding.

1. Prepare Ceiling Opening: Create a 4-1/4 inch diameter opening in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the installation area.
2. Připojení kabeláže: Open the junction box cover. Connect the building's electrical supply wires to the corresponding wires in the housing's junction box. Use appropriate wire connectors (not supplied). Ensure proper grounding. The housing is rated for 4 #12 90-degree conductors (2 in and 2 out).
3. Vložte pouzdro: Carefully insert the housing through the ceiling opening. The integral flange will rest against the ceiling surface.
4. Bezpečné bydlení: The exclusive locking bars are designed to secure the housing in ceilings from 1/2-inch to 1-inch thick. As you push the housing into the opening, the locking bars will engage and clamp onto the ceiling material. For thicker ceilings, a small screwdriver or pick can be used to rotate the bar up during installation to ensure proper engagement.
5. Install Trim (Sold Separately): Once the housing is securely in place, install the desired recessed lighting trim according to its specific instructions.
6. Nainstalovat L.amp: Insert a medium base lamp (bulb) into the socket within the housing.
7. Obnovit napájení: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, obnovte napájení jističem.

Operace

The Progress Lighting P832-TG Remodel Recessed Lighting Housing operates as a fixture for a medium base lamp. Once properly installed and connected to a power source, the housing will provide illumination when a compatible lamp is inserted and the electrical circuit is activated via a wall switch or dimmer (not included).

Ujistěte se, že lamp used is compatible with the housing's specifications and your electrical system.

Údržba

The P832-TG housing requires minimal maintenance. Regular cleaning and lamp replacement are the primary maintenance tasks.

• Čištění: Before cleaning, ensure power is disconnected at the circuit breaker. Wipe the exterior of the housing and any installed trim with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Lamp Nahrazení: Disconnect power before replacing a lampPovolte staré lamp to cool completely before removal. Replace with a new medium base lamp of the appropriate wattage a typ.
• Inspekce: Periodically inspect the housing and wiring for any signs of damage or wear. If any issues are found, disconnect power and consult a qualified electrician.

Odstraňování problémů

If you encounter issues with your recessed lighting housing, refer to the following table for common problems and solutions.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu nebo kvalifikovaného elektrikáře.

Specifikace

Informace o záruce

The Progress Lighting P832-TG Remodel Recessed Lighting Housing comes with a 1letá omezená záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from improper installation, misuse, abuse, or acts of nature. For full warranty terms and conditions, please refer to the documentation included with your product or contact Progress Lighting customer support.

Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Progress Lighting customer support.

You can also visit the official Progress Lighting store on Amazon for more product information and resources: Progress Lighting Store

Please have your model number (P832-TG) and purchase information ready when contacting support.