1. Úvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Ingersoll Rand 2545K10-P Electric Stationary Air Compressor. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent personal injury or equipment damage.
2. Bezpečnostní informace
VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k vážnému zranění nebo smrti.
- Před prováděním jakékoli údržby nebo servisu vždy odpojte napájení.
- Ensure the compressor is installed in a well-ventilated area to prevent overheating.
- Neprovozujte kompresor, pokud jsou některé jeho součásti poškozené nebo chybí.
- Wear appropriate personal protective equipment (PPE) such as eye protection and hearing protection.
- Nikdy nestříkejte stlačený vzduch na sebe ani na ostatní.
- Ensure all electrical connections comply with local codes and are properly grounded. The unit requires 230 Volts.
- Regularly inspect the pressure relief valve and tank for signs of corrosion or damage.
3. Konec produktuview
The Ingersoll Rand 2545K10-P is a Type-30 electric-driven, two-stage stationary air compressor designed for heavy shop or industrial use. It delivers reliable performance for various applications including automotive service, fleet maintenance, machine shops, and manufacturing lines. This premium package includes a low oil level switch, an aftercooler, and an automatic tank drain for enhanced functionality and longevity.
Figure 1: Ingersoll Rand 2545K10-P Electric Stationary Air Compressor. This image displays the full compressor unit, highlighting the motor, pump assembly, control panel, and the large vertical air receiver tank with the Ingersoll Rand logo.
4. Nastavení
- Vybalení a kontrola: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage immediately to the carrier and supplier.
- Umístění: Place the compressor on a level, stable surface capable of supporting its weight (approximately 1104 pounds). Ensure adequate clearance around the unit for ventilation and maintenance access. Avoid areas with excessive dust or moisture.
- Elektrické připojení: This compressor requires a 230 Volt, corded electric power source. A qualified electrician must perform all electrical wiring to ensure compliance with local electrical codes and proper grounding. Verify the power supply matches the compressor's requirements before connection.
- Počáteční kontroly: Before first use, check the oil level in the pump. The compressor is typically shipped with oil, but verification is crucial. Refer to the oil sight glass or dipstick.
5. Návod k obsluze
- Spuštění kompresoru: Ensure all connections are secure and the power supply is connected. Turn the main power switch to the 'ON' position. The compressor will start automatically when the tank pressure drops below the cut-in pressure setting.
- Monitorování provozu: Observe the pressure gauge to monitor tank pressure. The compressor is designed to automatically shut off when the maximum pressure (175 PSI) is reached and restart when pressure drops.
- Automatické vypnutí: The compressor features an automatic shut-off mechanism to prevent over-pressurization and to conserve energy.
- Vypínání: To turn off the compressor, switch the main power switch to the 'OFF' position. It is recommended to drain any accumulated moisture from the air tank after each use or at least daily.
6. Údržba
Regular maintenance is crucial for the longevity and efficient operation of your air compressor.
- Denní: Drain moisture from the air receiver tank using the automatic tank drain or manual valve. Check the oil level.
- Týdně/měsíčně: Inspect air filters, belts, and hoses for wear or damage. Clean or replace air filters as needed.
- Quarterly/Annually: Change compressor oil. Inspect the pressure relief valve. Check all fasteners for tightness.
For comprehensive maintenance, consider using the Maintenance Kit: 15920081.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Kompresor se nespustí | No power, tripped breaker, low oil level switch activated | Check power supply, reset breaker, check and add oil if necessary |
| Nízký tlak vzduchu | Air leak, clogged air filter, worn piston rings | Locate and fix leaks, clean/replace air filter, consult service technician |
| Nadměrný hluk nebo vibrace | Loose components, worn bearings, improper installation | Tighten fasteners, consult service technician for internal issues |
| Kompresor běží nepřetržitě | Pressure switch malfunction, air leak | Inspect pressure switch, check for air leaks |
For issues not listed or if solutions do not resolve the problem, contact customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Ingersoll Rand |
| Název modelu | 2545K10-P |
| Číslo modelu položky | 45465978 |
| svtage | 230 voltů |
| Zdroj napájení | Elektrický kabel |
| Maximální výkon | 10 koňské síly |
| Výkon motoru | 10 koňské síly |
| Proud vzduchu | 35 kubických stop za minutu (CFM) |
| Maximální tlak | 175 PSI |
| Hmotnost položky | 1104 libry |
| Rozměry balení | 82 x 44 x 32 palce |
| Doporučená použití | Průmyslový |
| Speciální funkce | Automatic Shut-Off, Aftercooler, Automatic Tank Drain, Low Oil Level Switch |
| Zahrnuté komponenty | Vzduchový kompresor |
| UPC | 400545000204, 678384659789 |
| Číslo dílu | 958892 |
| Datum první dostupnosti | 1. února 2007 |
9. Informace o záruce
The standard warranty on the reciprocating pump is 1 year. This warranty can be extended to 2 years with the use of the 2yr Warranty Start Up kit (#6131992), which is sold separately. For detailed warranty terms and conditions, please refer to the documentation provided with your purchase or contact Ingersoll Rand customer support.
Optional protection plans are available for purchase, including 3-Year and 4-Year plans, offering extended coverage beyond the manufacturer's warranty.
10. Podpora a kontakt
If you require technical assistance, have questions regarding operation or maintenance, or need to order replacement parts, please contact Ingersoll Rand customer support. Ensure you have your model number (2545K10-P) and serial number ready when contacting support.
For additional resources and product information, visit the official Ingersoll Rand webmísto.