Uživatelská příručka k programovatelnému termostatu Honeywell RTH230B s 5-2denní klimatizací

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your Honeywell RTH230B 5-2 Day Programmable Thermostat. This thermostat is designed to control your heating and cooling system, offering programmable schedules for weekdays and weekends to optimize comfort and energy efficiency. It features a large, easy-to-read digital display and precise temperature control.

Nastavení a instalace

Before beginning installation, ensure the power to your heating and cooling system is turned off at the circuit breaker or fuse box to prevent electrical shock and damage to the equipment. This thermostat is compatible with central gas, oil, or electric furnaces and air conditioning for single-stage heating and cooling systems, or millivolt systems.

1. Demontujte starý termostat

1. Vypněte napájení systému vytápění/chlazení.
2. Odstraňte kryt starého termostatu.
3. Take a picture of the wiring connections for reference. Label each wire with the terminal designation (e.g., R, G, Y, W).
4. Disconnect the wires and remove the old thermostat's backplate.

2. Mount New Thermostat Backplate

1. Position the new thermostat backplate against the wall.
2. Mark the mounting holes. Drill pilot holes if necessary.
3. Připevněte zadní desku ke stěně pomocí dodaných šroubů.

3. Zapojte termostat

Connect the wires to the corresponding terminals on the new backplate, referring to the picture taken earlier and the compatibility chart below. Ensure connections are secure.

Obraz: Rear packaging of the Honeywell RTH230B thermostat, illustrating the three-step installation process and a detailed compatibility chart for various HVAC systems. This chart helps identify correct wiring configurations.

Compatibility Chart Overview: The thermostat supports 24V AC systems for single-stage heating and cooling, as well as millivolt systems. Refer to the chart on the product packaging for specific wiring configurations based on your system type (e.g., gas furnace, oil furnace, electric furnace, heat pump without auxiliary heat, 2-wire systems).

4. Nainstalujte baterie

Insert two new AA alkaline batteries (not included) into the battery compartment. Ensure correct polarity. The thermostat retains program memory during power outages, but batteries are required for operation.

5. Attach Thermostat to Backplate

Align the thermostat with the backplate and gently push until it snaps into place.

6. Obnovte napájení

Turn the power back on at the circuit breaker or fuse box. The thermostat display should illuminate.

Návod k obsluze

The Honeywell RTH230B features a clear digital display and intuitive buttons for easy control.

Obraz: A close-up of the Honeywell RTH230B thermostat's front panel, highlighting the digital screen displaying time and temperature, along with the up/down arrow buttons for adjustments.

Nastavení času a dne

Access the menu to set the current time and day of the week. Use the up/down arrows to adjust values and confirm with the appropriate button (refer to the thermostat's on-screen prompts or internal instructions for specific button functions).

Programming a Schedule (5-2 Day)

The thermostat allows for separate programming for weekdays (5 days) and weekends (2 days), with up to four programmable periods per day (Wake, Leave, Return, Sleep). This enables customized temperature settings to match your daily routine.

1. Enter programming mode (consult your thermostat's specific button sequence, usually a "Program" or "Set" button).
2. Set the desired temperature and time for each of the four periods (Wake, Leave, Return, Sleep) for weekdays.
3. Repeat the process for weekend programming.
4. Uložte nastavení a ukončete programovací režim.

Adjusting Temperature (Temporary Override)

To temporarily adjust the temperature without changing the programmed schedule, use the up/down arrow buttons. The new temperature will be maintained until the next programmed period begins, at which point the thermostat will revert to the schedule.

Režimy systému

• Teplo: Termostat ovládá topný systém.
• Ochladit: Termostat ovládá chladicí systém.
• Vypnuto: Systémy vytápění i chlazení jsou vypnuty.

Režimy ventilátoru

• Auto: Ventilátor běží pouze tehdy, když je aktivně zapnuto topení nebo chlazení.
• Na: Ventilátor běží nepřetržitě, bez ohledu na to, zda je aktivní systém topení nebo chlazení.

Údržba

Výměna baterie

The thermostat requires two AA alkaline batteries for operation. When the battery indicator appears on the display, replace the batteries promptly to ensure continuous operation. The thermostat features an easy-access battery compartment.

1. Otevřete kryt bateriového prostoru.
2. Vyjměte staré baterie.
3. Insert two new AA alkaline batteries, observing the correct polarity (+/-).
4. Zavřete kryt prostoru pro baterie.

Připomenutí změny filtru

The thermostat includes a filter change reminder feature. When the filter indicator appears, it is time to check or replace your HVAC system's air filter. Regularly changing your air filter helps maintain system efficiency and air quality.

Čištění

Očistěte vnější povrch termostatu měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.

Odstraňování problémů

Pokud máte problémy s termostatem, podívejte se na následující běžné problémy a jejich řešení:

For issues not listed here, or if solutions do not resolve the problem, please contact Honeywell Home customer support.

Specifikace

• Značka: Domov Honeywell
• Model: RTH230B
• Typ ovladače: Stiskněte tlačítko
• Speciální vlastnosti: Auto Changeover, Programmable (5-2 Day, 4 periods per day)
• Barva: Bílý
• Specifická použití: Central Gas, Oil, Electric Furnaces & Air Conditioning (Single Stage), Millivolt Systems
• Typ regulace teploty: Topení, Chlazení
• Zdroj napájení: Napájení na baterie (2 AA baterie, nejsou součástí balení)
• svtage: 30 voltů
• Typ displeje: Digitální
• Způsob ovládání: Dotykové (tlačítka)
• Typ montáže: Držák na zeď
• Přesnost regulace teploty: ± 1 ° C
• Volby zobrazení: Fahrenheit or Celsius, 12 or 24 hour time
• Podsvícení: Žádný
• Rozměry: Approximately 11 x 7.5 x 9.25 inches (Product dimensions from JSON, likely packaging)
• Hmotnost položky: Přibližně 7.2 unce
• UPC: 085267263450

Záruka a podpora

Informace o záruce

This Honeywell RTH230B thermostat comes with a 1letá záruka na produkt from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Honeywell Home webmísto.

Zákaznická podpora

For technical assistance, troubleshooting guidance, or warranty claims, please contact Honeywell Home customer support. You can typically find contact information (phone number, website) on the product packaging or by visiting the Honeywell Home official webmísto.

Online zdroje: For additional support and frequently asked questions, visit the Honeywell Home support portal.