Eiko EYB
Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp Návod k použití
1. Úvod
This manual provides essential information for the safe and effective use of your Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp. Please read these instructions carefully before installation and operation to ensure proper function and longevity of the product.
2. Bezpečnostní informace
Halogen lamps operate at high temperatures and contain pressurized gas. Improper handling or use can result in personal injury or property damage. Adhere to the following safety guidelines:
- Před instalací, demontáží nebo čištěním svítidla vždy odpojte napájení.amp.
- Povolit lamp to cool completely before handling to prevent burns.
- Avoid touching the glass envelope of the lamp with bare hands. Oils from skin can create hot spots, leading to premature failure. Use a clean cloth or gloves during handling.
- Nepřekračujte stanovený objemtage a wattage for your fixture.
- Ujistěte se, že lamp is securely seated in its base before applying power.
- Použité l. zlikvidujteamps according to local environmental regulations.
3. Nastavení a instalace
Follow these steps for proper installation of the Eiko EYB halogen lamp:
- Odpojení napájení: Ensure the power supply to the fixture is completely turned off and locked out if possible.
- Chlazení: Pokud nahrazujete stávající lamp, allow it to cool down for at least 15 minutes to prevent burns.
- Old Lamp Odstranění (pokud je to relevantní): Pečlivě uchopte staré lamp and pull it straight out from the G5.3 base. Avoid twisting if the base is a push-in type.
- Nový Lamp Zacházení: Handle the new Eiko EYB lamp by its ceramic base. Do not touch the glass bulb with bare hands. If the glass is accidentally touched, clean it thoroughly with rubbing alcohol and a lint-free cloth before installation.
- Vložení: Align the two pins of the Eiko EYB lamp with the holes in the G5.3 base. Gently push the lamp straight into the base until it is fully seated. Do not force the lamp.
- Obnovení napájení: Jakmile lamp je bezpečně nainstalován, obnovte napájení svítidla.

Detailní záběr view of the Eiko EYB halogen lamp, showing its clear glass envelope, coiled tungsten filament, and the white ceramic G5.3 base with two metal pins. The base is labeled with 'EIKO EYB 82V 360W CHINA'.
4. Návod k obsluze
The Eiko EYB halogen lamp is designed for straightforward operation within compatible fixtures.
- Zapnutí/vypnutí: Activate the fixture's power switch to turn the lamp zapnuto nebo vypnuto.
- Stmívání (pokud existuje): Tento lamp is dimmable. If your fixture is equipped with a compatible dimmer switch, you can adjust the light output. Ensure the dimmer is rated for halogen lamps and the total wattage of the installed lamps.
5. Údržba
Regular maintenance helps ensure optimal performance and longevity of your Eiko EYB halogen lamp.
- Čištění: Pokud lamp's glass envelope becomes dusty or dirty, disconnect power and allow it to cool. Gently wipe the glass with a clean, dry, lint-free cloth. For stubborn marks, use a small amount of rubbing alcohol.
- Inspekce: Pravidelně kontrolujte lamp for any signs of damage or discoloration. If the lamp appears dim or flickers, it may be nearing the end of its lifespan.
- Nahrazení: Vyměňte lamp when it fails or when its light output significantly diminishes. Always replace with a lamp stejného svazkutage a wattage (Eiko EYB 82V 360W) to ensure compatibility and safety.
6. Řešení problémů
If you encounter issues with your Eiko EYB halogen lamp, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Lamp nesvítí | No power to fixture, loose connection, faulty lamp, faulty fixture | Check power supply, ensure lamp is fully seated, replace lamp, inspect fixture wiring |
| Lamp je matná | Lamp nearing end of life, incorrect voltage, dirty glass | Vyměňte lamp, verify fixture voltage, clean lamp sklo |
| Lamp fails prematurely | Voltage, improper handling (fingerprints), excessive vibration, faulty fixture | Ověřte objem svítidlatage, handle with gloves, ensure stable mounting, inspect fixture |
If problems persist after attempting these solutions, consult a qualified electrician or the fixture manufacturer.
7. Specifikace
Key technical specifications for the Eiko EYB 82V 360W T3-1/2 G5.3 Base Halogen Lamp:
- Značka: Eiko
- Model: EYB
- svtage: 82 voltů
- Wattage: 360 wattů
- Typ světla: Halogen
- Velikost tvaru žárovky: T3-1/2
- Základna žárovky: G5.3
- Barva světla: Světle bílá
- Teplota barev: 3300 Kelvinů
- Jas: 10000 XNUMX lumenů
- Materiál: Wolfram
- Rozměry produktu: 1 x 1 x 2.7 palce
- Hmotnost položky: 1.6 unce
- Speciální funkce: Stmívatelné
8. Informace o záruce
This product is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official Eiko website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.
9. Podpora a kontaktní informace
For technical assistance, product inquiries, or further support, please contact Eiko customer service.
- Výrobce: Eiko
- Webmísto: Refer to Eiko's official webstránky s aktuálními kontaktními údaji.
- Služby zákazníkům: Refer to Eiko's official webstránky s aktuálními kontaktními údaji.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.