1. Úvod
This manual provides essential instructions for the installation, maintenance, and proper use of your Wahl Professional 2-Hole Standard Clipper Blade, Model 1006. Designed for professional precision, this replacement blade ensures accurate and sharp performance for various Wahl clippers. Please read this manual thoroughly before use to ensure optimal performance and longevity of your blade.
Image 1: Wahl Professional 2-Hole Standard Clipper Blade, Model 1006.
2. Kompatibilita
The Wahl Professional 2-Hole Standard Clipper Blade (Model 1006) is compatible with the following Wahl clipper models:
- Wahl Super Taper
- Wahl Super Taper II
- Wahl Icon
- Wahl Pro Basic
- Wahl Sterling 9
Image 2: Various Wahl clipper models compatible with the 2-Hole Standard Clipper Blade.
3. Obsah balení
Your Wahl Professional 2-Hole Standard Clipper Blade package includes:
- 1mm-3mm Standard Clipper Blade
- Čepel olej
- Montážní šrouby
- Návod k instalaci (tento návod)
4. Instalace čepele
Follow these steps to properly install your new clipper blade:
- Vypnout: Ensure your clipper is turned off and unplugged from the power source before beginning installation.
- Odstraňte starou čepel: Using a screwdriver, carefully loosen and remove the two screws holding the old blade assembly to the clipper housing. Set aside the old blade and screws.
- Clean Clipper: Clean any hair or debris from the clipper's blade area using a brush.
- Position New Blade: Place the new Wahl Professional 2-Hole Standard Clipper Blade onto the clipper, aligning the holes in the blade with the screw holes on the clipper. Ensure the small moving blade is correctly seated on the drive lever.
- Bezpečná čepel: Insert the screws and tighten them just enough to hold the blade in place, allowing for slight adjustment.
- Align Blades: Adjust the blade to ensure the top blade (cutter) is perfectly aligned with the bottom blade (comb), with the teeth of the top blade slightly behind the teeth of the bottom blade. This prevents cutting the skin.
- Konečné utažení: Once aligned, firmly tighten both screws. Do not overtighten.
- Mazat: Apply a few drops of Wahl clipper oil to the teeth of the new blade.
Obrázek 3: Detailní view of the 2-Hole Standard Clipper Blade, highlighting its design and dimensions.
5. Údržba
Proper maintenance is crucial for extending the life and performance of your clipper blade.
5.1 Mazání nožů
Regular oiling reduces friction, prevents rusting, and ensures smooth cutting performance. Wahl's high-carbon blades benefit significantly from consistent lubrication.
- Naneste olej: With the clipper turned off, apply a drop of Wahl clipper oil to each corner of the top blade and one drop to the foot of the blade.
- Distribute Oil: Turn the clipper on for a few seconds to allow the oil to work its way into the blades.
- Otřete přebytečný materiál: Přebytečný olej setřete čistým hadříkem.
It is recommended to oil your blades before or after each use, especially if the clipper feels sluggish or pulls hair.
Video 1: Demonstrates how to oil clipper blades to prevent pulling and ensure smooth operation.
5.2 Čištění nožů
After each use, brush off any loose hair from the blades. For a deeper clean, especially after prolonged use or if hair buildup is noticeable:
- Vyčesávání vlasů: Use a small cleaning brush to remove hair from between the blade teeth.
- Disinfect (Optional): For professional use, consider using a clipper disinfectant spray (e.g., Wahl Clini-Clip Spray) to sanitize the blades. Follow the product's instructions.
- Re-oil: Always re-oil the blades after cleaning or disinfecting to prevent rust and maintain lubrication.
Image 4: Essential maintenance products for Wahl clippers, including blade oil and disinfectant spray.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Clipper pulls or snags hair | Čepele jsou tupé, špinavé nebo nejsou správně naolejované. | Vyčistěte a namažte nože. Pokud problém přetrvává, může být nutné nože nabrousit nebo vyměnit. |
| Blades are rusting | Insufficient oiling or exposure to moisture. | Ensure blades are thoroughly dried after cleaning and regularly oiled, especially in humid environments. |
| Nůž neřeže efektivně | Improper blade alignment or worn blades. | Check blade alignment as per installation instructions. If blades are old, consider replacing them. |
7. Specifikace
- Název produktu: 2-Hole Standard Clipper Blade
- Číslo modelu: 1006
- Značka: Wahl Professional
- Délka řezu: 1mm-3mm (Standard)
- Materiál: Ocel s vysokým obsahem uhlíku
- Rozměry: 2 x 0.1 x 3 palce
- Hmotnost položky: 0.8 unce
- UPC: 785085010068, 043917100609
- Výrobce: Wahl Professional
- Původ: Vyrobeno v USA
8. Záruka a podpora
For warranty information, product support, or to purchase additional accessories, please visit the official Wahl Professional webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.
Wahl Professional Webmísto: www.wahlpro.com