Viper 479V Responder Remote Instruction Manual

1. Konec produktuview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Klíčové vlastnosti:

• Obousměrná komunikace: Provides visual and audible confirmation when commands are sent successfully.
• Rozšířený rozsah: Operates with up to 1/2 mile range.
• LCD displej: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Kompatibilita systému

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Zmije 542V
• Zmije 434V
• Zmije 554V
• Zmije 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Připravte vozidlo:
   • Open the driver's side door.
   • Vložte klíč do zapalování.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Vstupte do režimu programování:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and držet it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and držet it. The car's siren will chirp once.
4. Program Remote: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Ukončete režim programování: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Test dálkového ovládání: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Ovládání dálkového ovladače

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Základní funkce:

• Zámek: Press the lock button to arm your vehicle's security system and lock the doors.
• Odemknout: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Vzdálený start: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Pomocné funkce: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Údržba

Výměna baterie:

The Viper 479V remote requires dv� baterie AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
2. Opatrně posuňte nebo odepněte kryt a otevřete přihrádku.
3. Vyjměte staré baterie AAA.
4. Vložte dvě nové baterie AAA a dbejte na správnou polaritu (+/-).
5. Bezpečně nasaďte kryt prostoru pro baterie.

Péče a manipulace:

• Vyvarujte se vystavení vodě: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Chraňte před kapkami: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Jemně čistěte: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Extrémní teploty: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Řešení problémů

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• Dálkové ovládání nereaguje:
  • Zkontrolujte a vyměňte baterie AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Zmenšený dosah:
  • Vyměňte baterie.
  • Ujistěte se, že mezi dálkovým ovladačem a vozidlem nejsou žádné významné překážky.
• Problémy s LCD displejem:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• Tlačítka nefungují:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Specifikace

8. Informace o záruce

The Viper 479V Responder Remote comes with a 1-letá záruka výrobceTato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Uschovejte si prosím doklad o koupi pro případ uplatnění záruky.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Podpora

Pro další pomoc, technickou podporu nebo dotazy, které nejsou uvedeny v této příručce, se prosím obraťte na následující zdroje:

• Viper Official Webmísto: Visit the official Viper webweb s aktualizacemi produktů, častými dotazy a další podpůrnou dokumentací.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Služby zákazníkům: Refer to your product packaging or the Viper webstránky s kontaktními informacemi zákaznického servisu.