Taylor 5831N

Taylor Mechanical Long Ring Timer

Model: 5831N

Zavedení

The Taylor Mechanical Long Ring Timer is a reliable and easy-to-use device designed for precise time management in various settings, particularly in the kitchen. This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your timer.

Klíčové vlastnosti:

  • 60-minute countdown capacity.
  • Simple twist-dial operation.
  • Loud, 5-second alarm ring.
  • Bold black and white graphics for easy readability.
  • Odolná plastová konstrukce.

Konec produktuview

The Taylor Mechanical Long Ring Timer features a classic design with a clear, easy-to-read dial. It is compact and designed for convenient placement on any flat surface.

Taylor Mechanical Long Ring Timer, front view

Obrázek 1: Přední strana view of the Taylor Mechanical Long Ring Timer.

Taylor Mechanical Long Ring Timer with dimensions: 3.5 inches wide, 3.5 inches high, 1.5 inches deep

Figure 2: Dimensions of the Taylor Mechanical Long Ring Timer (3.5"D x 3.5"W x 1.5"H).

Nastavení

Your Taylor Mechanical Long Ring Timer requires no batteries or complex assembly. It is ready for use directly out of the packaging.

  1. Vyjměte časovač z obalu.
  2. Place the timer on a stable, flat surface where it can be easily seen and heard.

Návod k obsluze

To ensure the alarm rings for the full 5 seconds, it is crucial to wind the timer past the desired time before setting it back. This action fully engages the internal mechanism.

  1. Naviňte časovač: Turn the dial clockwise all the way to the 60-minute mark. This winds the internal spring mechanism.
  2. Set the Desired Time: Turn the dial counter-clockwise to the desired time setting (e.g., 15 minutes).
  3. Zahájit odpočítávání: The timer will begin to tick, counting down the set time.
  4. Poplach: Once the dial reaches the zero mark, the timer will sound a loud, approximately 5-second ring.

Důležitá poznámka: Failure to fully wind the timer to 60 minutes before setting the desired time may result in a shorter or no alarm sound.

Údržba

Proper care will ensure the longevity and accuracy of your timer.

  • Čištění: Otřete časovač měkkým, damp cloth. Do not immerse the timer in water or use abrasive cleaners.
  • Skladování: Store the timer in a dry place at room temperature.
  • Vyhněte se extrémním podmínkám: Do not expose the timer to extreme heat, cold, or humidity, as this may affect its mechanical components.

Odstraňování problémů

ProblémMožná příčinaŘešení
Timer does not ring or rings for a short duration.Timer was not fully wound to 60 minutes before setting.Always turn the dial clockwise to the 60-minute mark, then counter-clockwise to the desired time.
Timer is not ticking.Timer not wound or mechanism is stuck.Ensure the timer is fully wound. If the issue persists, contact customer support.

Specifikace

  • Číslo modelu: 5831N
  • Značka: Taylor
  • Materiál: Plast
  • Barva: Bílý
  • Rozměry produktu: 1.5"H x 3.5"Š x 3.5"V
  • Hmotnost položky: 1.6 uncí
  • Nastavení maximálního času: 60 minut
  • Doba trvání alarmu: Přibližně 5 sekundy
  • UPC: 077784058312

Záruka a podpora

The Taylor Mechanical Long Ring Timer is covered by a Jednoletá omezená záruka from the manufacturer, Lifetime Brands Inc. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please contact Taylor customer service. Refer to the official Taylor webNejnovější kontaktní informace naleznete na webu nebo na obalu produktu.

About Taylor

For over 170 years, Taylor has been a trusted brand in measurement, known for its commitment to high quality, precision, and innovative designs in kitchen, weather, and bath products. Taylor products are designed for everyday use, delivering dependable and durable performance.

Video: "Taylor - Life Measured" - An overview of the Taylor brand's commitment to precision and quality in various products.

© 2026 Taylor. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.