Zavedení
This manual provides instructions for the safe and proper use of the Valcom VP-412A 400 mA -12V DC Power Supply. This power supply is designed to provide 12V DC power at 400mA for compatible Valcom equipment, such as the V-2952.
Důležité bezpečnostní informace
- Před použitím si přečtěte všechny pokyny.
- Nevystavujte napájecí zdroj vlhkosti ani extrémním teplotám.
- Ujistěte se, že je zdroj napájení připojen k řádně uzemněné zásuvce.
- Nepokoušejte se otevírat ani opravovat napájecí zdroj. Veškerý servis svěřte kvalifikovanému personálu.
- Use only with devices that require 12V DC and a maximum of 400mA. Connecting to incompatible devices may cause damage.
Konec produktuview
The Valcom VP-412A is a compact wall-mount power adapter. It converts standard AC wall power to a stable 12V DC output suitable for various electronic devices.
This image displays the Valcom VP-412A power supply. It consists of a black power adapter block with two prongs for wall outlet connection, and an attached black cable terminating in a right-angle DC barrel connector. A label on the power block shows 'VALCOM CLASS 2 POWER SUPPLY INPUT 120VAC 60Hz 12W OUTPUT 12VDC 400mA CLASS 2 TRANSFORMER'.
Pokyny pro nastavení
- Ověřte kompatibilitu: Before connecting, ensure your device requires a 12V DC power input and draws no more than 400mA. Check your device's specifications or user manual.
- Připojit k zařízení: Insert the DC barrel connector from the VP-412A power supply into the corresponding power input port on your Valcom device. Ensure a secure connection.
- Připojte k elektrické zásuvce: Plug the power supply's AC prongs into a standard 120VAC 60Hz wall outlet.
- Zapnutí: Once connected, your device should receive power. Refer to your device's manual for specific power-on procedures.
Obsluha napájecího zdroje
The Valcom VP-412A power supply operates continuously when plugged into an active AC outlet. It provides a stable 12V DC output to the connected device. There are no user-adjustable settings or controls on the power supply itself.
- Always ensure the power supply is securely plugged into both the wall outlet and the device.
- To disconnect power, unplug the power supply from the wall outlet first, then disconnect from the device.
Údržba a péče
- Keep the power supply clean and free from dust. Use a soft, dry cloth for cleaning.
- Nepoužívejte tekuté čisticí prostředky ani aerosoly.
- Pokud napájecí zdroj nepoužíváte, skladujte jej na chladném a suchém místě.
- Inspect the cable and connector periodically for any signs of damage. If damage is observed, discontinue use and replace the unit.
Odstraňování problémů
If your device is not receiving power, consider the following:
- Zařízení není napájeno:
- Ensure the power supply is firmly plugged into a working wall outlet. Test the outlet with another device.
- Verify the DC barrel connector is fully inserted into your device's power input.
- Confirm that your device is compatible with a 12V DC, 400mA power supply. Using an incorrect power supply can prevent operation or cause damage.
- Check the power supply cable for any visible damage (cuts, kinks).
- Porucha zařízení: If the device powers on but malfunctions, ensure the power supply's voltage and current ratings match your device's requirements precisely. Incorrect voltage or insufficient current can lead to unstable operation.
If troubleshooting steps do not resolve the issue, contact Valcom customer support or a qualified technician.
Specifikace
| Číslo modelu | VP-412A |
| Vstupní objemtage | 120VAC, 60Hz |
| Vstup Wattage | 12W |
| Výstupní objemtage | 12V DC |
| Výstupní proud | 400 mA |
| Rozměry produktu (D x Š x V) | 2 x 1.61 x 2.6 palce |
| Hmotnost položky | 10.4 unce (přibližně 0.65 lb) |
| Způsob chlazení | Vzduch |
| Typ konektoru | DC Barrel Connector (Note: Product data may list ATX, but visual inspection confirms a DC barrel connector.) |
Informace o záruce
Valcom products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Valcom webUschovejte si doklad o koupi pro případ reklamace.
Zákaznická podpora
For technical assistance, product inquiries, or warranty service, please contact Valcom customer support:
- Webmísto: www.valcom.com (Navštivte prosím úředníka webstránky s aktuálními kontaktními údaji.)
- Refer to your product packaging or the Valcom website for phone numbers and email contacts.