1. Konec produktuview
The BESSEY MMS-8 is an 8-inch all-steel clamp designed for robust and reliable workholding. Known for its durability and precision, this clamp is a versatile tool suitable for various applications in woodworking, metalworking, and general shop use. Its unique construction from a single piece of cold-drawn steel ensures exceptional strength and longevity.
Obrázek 1: Přední strana view of the BESSEY MMS-8 All Steel Clamp, showcasing its robust design and galvanized finish.
Klíčové vlastnosti:
- Celoocelová konstrukce: Clamp rail and fixed jaw are crafted from a single piece of BESSEY cold-drawn steel, ensuring superior strength and rigidity.
- Heat-Treated Rail: After bending and forming, the rails are heat-treated for maximum strength and resistance to deformation.
- Electro-Galvanized Sliding Arm: The drop-forged, electro-galvanized steel sliding arm provides smooth operation and corrosion resistance.
- Standard Swivel Pressure Pads: Equipped with durable swivel pressure pads for secure and even clamping force distribution.
- Steel Sliding T-Bar Handle: Ergonomically designed T-bar handle allows for comfortable and efficient tightening.
- Vysoké ClampTlak: Capable of generating up to 660 lbs of clamping force, making it significantly stronger and faster than traditional C-clamps.
Obrázek 2: Strana view of the BESSEY MMS-8 clamp, highlighting the sliding arm and screw mechanism.
2. Nastavení
The BESSEY MMS-8 clamp is designed for immediate use with minimal setup. Before first use, inspect the clamp for any signs of shipping damage. Ensure all components, including the fixed jaw, sliding arm, screw, and handle, are securely in place and operate smoothly.
- Rozbalení: Opatrně vyjměte třamp z jeho obalu.
- Počáteční kontrola: Check for any loose parts or visible damage.
- Seznámení se: Operate the sliding arm and screw mechanism a few times to understand its movement and ensure smooth action.
3. Návod k obsluze
Using the BESSEY MMS-8 clamp is straightforward. Always ensure the workpiece is stable and properly supported before applying clamptlakem.
Obrázek 3: Detail view of the screw mechanism and swivel pad, demonstrating the precision engineering.
- Positioning the Sliding Arm: Loosen the T-bar handle slightly. Slide the movable jaw along the rail until it is close to your workpiece.
- Zajištění obrobku: Umístěte třamp over the workpiece, ensuring both the fixed jaw and the swivel pressure pad are in full contact with the surfaces to be clampvyd.
- Vyvíjení tlaku: Turn the T-bar handle clockwise to tighten the screw and apply clamping pressure. Apply only enough pressure to securely hold the workpiece without causing damage. The precision of the screw allows for fine adjustments.
- Releasing Clamp: Turn the T-bar handle counter-clockwise to release the pressure, then slide the movable jaw away from the workpiece.
Poznámka: For delicate surfaces, consider using protective pads between the clamp jaws and the workpiece to prevent marring.
4. Údržba
Regular maintenance will ensure the longevity and optimal performance of your BESSEY MMS-8 clamp.
- Čištění: Po každém použití otřete nádobkuamp with a clean, dry cloth to remove any dust, debris, or moisture.
- Mazání: Periodically apply a light coat of machine oil to the screw threads and the sliding mechanism to ensure smooth operation and prevent rust.
- Skladování: Uložte clamp v suchém prostředí, aby se zabránilo korozi.
- Inspekce: Pravidelně kontrolujte třamp for any signs of wear, damage, or bending. Do not use a damaged clamp.
5. Řešení problémů
Most issues with the BESSEY MMS-8 clamp can be resolved with simple checks.
- Clamp not holding securely: Ensure the workpiece is clean and free of oils or debris. Verify that the swivel pressure pads are making full contact. Apply adequate, but not excessive, pressure.
- Screw mechanism stiff or difficult to turn: The screw threads may be dirty or require lubrication. Clean the threads thoroughly and apply a suitable lubricant.
- Sliding arm sticking: The rail may be dirty or require lubrication. Clean the rail and apply a light lubricant. Ensure no debris is lodged in the sliding mechanism.
6. Specifikace
Figure 4: BESSEY MMS-8 clamp with its product tag, showing key specifications.
| Specifikace | Hodnota |
|---|---|
| Značka | BESSEY |
| Číslo modelu | T23269 (MMS-8) |
| Materiál | Legovaná ocel |
| Barva | Bright Galvanized |
| Rozměry položky (D x Š x V) | 8 x 4 x 2.67 palce |
| Hmotnost položky | 0.7 libry (11.2 unce) |
| Tensile Strength / Clamping Tlak | 660 libry |
| Kapacita | 8 palců |
| Hloubka hrdla | 2-1/2 palce |
| UPC | 788502009997, 787721111894 |
| Výrobce | Bessey |
| Zahrnuté komponenty | Unit, Instruction Guide |
Obrázek 5: Zpět view of the BESSEY MMS-8 clamp, showing the barcode and manufacturing details.
7. Záruka a podpora
BESSEY products are manufactured to high standards of quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official BESSEY website. If you encounter any issues or require technical assistance, please contact BESSEY customer support through their official channels.
Pro další informace a registraci produktu navštivte prosím: www.bessey.com
