Metra 70-1858 Radio Wiring Harness - Instruction Manual

Zavedení

The Metra 70-1858 Radio Wiring Harness is designed to simplify the installation of an aftermarket receiver into select General Motors vehicles manufactured between 1988 and 2002. This harness provides a direct connection to the factory plug, eliminating the need for cutting and splicing original vehicle wiring. This manual provides essential information for proper installation and use.

Image: Metra 70-1858 Radio Wiring Harness, showing the multi-pin connector and colored wires.

Kompatibilita vozidel

This wiring harness is compatible with select General Motors vehicles from model years 1988 to 2002. Please verify your vehicle's specific model and year against the product's compatibility list to ensure proper fitment before installation.

Nastavení instalace

Before beginning installation, ensure the vehicle's battery is disconnected to prevent electrical shorts or damage. Identify the factory radio wiring harness in your vehicle. The Metra 70-1858 harness is designed to plug directly into this factory connector.

Připojení vodičů

Match the colored wires of the Metra 70-1858 harness to the corresponding wires of your aftermarket radio's wiring harness. Typically, wire colors are standardized across aftermarket radio manufacturers, but always refer to your aftermarket radio's instruction manual for specific wiring diagrams.

• Napájecí vodiče: Připojte vodiče pro konstantní napětí 12 V (žlutý), příslušenství 12 V (červený) a uzemnění (černý).
• Dráty reproduktorů: Match the positive and negative wires for each speaker (e.g., white/white-black for front left, gray/gray-black for front right, green/green-black for rear left, purple/purple-black for rear right).
• Anténa/AmpZapnutí zařízení Liferier: Connect the blue wire for power antenna or ampdálkové zapnutí záchranáře, je-li to možné.
• Osvětlení/Stmívač: Connect the orange wire for illumination or dimmer control, if applicable.

After all connections are securely made (preferably soldered and heat-shrunk, or crimped with high-quality connectors), plug the Metra harness into the vehicle's factory radio connector. Reconnect the vehicle battery and test the aftermarket radio's functionality.

Obrázek: Detail view of the Metra 70-1858 wiring harness, showing the various colored wires and connectors.

Operace

Once installed, the Metra 70-1858 harness allows your aftermarket radio to operate as intended, receiving power and sending audio signals to the vehicle's speakers through the factory wiring. Ensure all radio functions, including power, volume, balance, fade, and station tuning, are working correctly after installation.

Údržba

The Metra 70-1858 wiring harness requires no routine maintenance. Ensure all connections remain secure and free from corrosion. If any issues arise, inspect the wiring connections for looseness or damage.

Odstraňování problémů

• Rádio není napájeno: Check the vehicle's fuse box for blown fuses. Verify the constant 12V (yellow) and accessory 12V (red) wires are correctly connected and receiving power. Ensure the ground (black) wire has a solid connection.
• Z reproduktorů není slyšet žádný zvuk: Confirm all speaker wires are correctly matched and connected. Check the aftermarket radio's settings for balance and fade. Ensure the amplifier remote turn-on (blue wire) is connected if an external amppoužívá se lifikátor.
• Přerušovaná funkce: Inspect all wire connections for looseness or poor contact. Ensure wires are not pinched or damaged.

Specifikace

Záruka a podpora

The Metra 70-1858 Radio Wiring Harness comes with a 1letá omezená záruka. This warranty does not cover misuse of the product. For technical assistance or support, please contact Metra's technical support team.

Image: Metra Tech Support contact information, including phone number.

Metra Technical Support: 386-257-1187