Altec Lansing 120

Altec Lansing 120 Satellite Speaker System Instruction Manual

Zavedení

The Altec Lansing 120 is a two-satellite speaker system designed to enhance the audio experience for various devices. This system provides clear sound for personal computers, video gaming systems, portable CD players, MP3 players, and other audio sources. Its compact design and simple connectivity make it a versatile audio solution.

Mezi klíčové vlastnosti patří:

  • 2 Watts total Continuous Power output.
  • Compatibility with multiple audio sources including PCs, gaming systems, portable CD players, and MP3 players.
  • Integrated Power On/Off and Master Volume controls for easy operation.
  • Convenient Headphone Jack for private listening.
  • Shielded Satellites to prevent interference with other electronic devices.

Obsah balení

Prosím, ověřte, zda jsou v balení přítomny všechny položky:

  • Two (2) Altec Lansing 120 Satellite Speakers
  • One (1) Audio Input Cable (3.5mm stereo jack)
  • Jeden (1) AC napájecí adaptér

Pokyny pro nastavení

Follow these steps to set up your Altec Lansing 120 speaker system:

  1. Umístění reproduktorů: Place the two satellite speakers on a stable, flat surface, ideally on either side of your listening area (e.g., computer monitor, TV) for optimal stereo sound. Ensure they are positioned to direct sound towards you.
  2. Připojení k napájení: Plug the AC power adapter into the designated power input port on one of the satellite speakers. Then, plug the other end of the power adapter into a standard wall electrical outlet.
  3. Připojení ke zdroji zvuku: Locate the 3.5mm audio input jack on the back of the primary satellite speaker. Connect one end of the supplied audio input cable to this jack. Connect the other end of the audio cable to the audio output jack (typically green) on your PC, gaming console, portable CD player, or MP3 player.
Altec Lansing 120 Satellite Speakers connected to a device

Image: The Altec Lansing 120 satellite speakers, showing their compact design and typical setup next to a computer monitor. The image illustrates the two speakers with their cables connected, ready for use.

Návod k obsluze

Once the speakers are set up, follow these steps for operation:

  • Zapnutí/vypnutí: Locate the integrated power control (often combined with the volume knob) on the primary satellite speaker. Turn the knob clockwise to power on the speakers. Turn it counter-clockwise until it clicks to power off.
  • Nastavení hlasitosti: Rotate the master volume control knob on the primary satellite speaker to increase or decrease the sound level. It is recommended to start with a low volume and gradually increase it to a comfortable listening level. Also, ensure the volume on your audio source device (PC, MP3 player, etc.) is adequately adjusted.
  • Použití konektoru pro sluchátka: For private listening, plug your headphones into the headphone jack located on the primary satellite speaker. Plugging in headphones will automatically mute the speaker output. Unplugging the headphones will restore sound through the speakers.

Údržba

To ensure the longevity and optimal performance of your Altec Lansing 120 speaker system, follow these maintenance guidelines:

  • Čištění: Use a soft, dry cloth to clean the exterior of the speakers. Avoid using liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Větrání: Ensure that the speakers are placed in an area with adequate ventilation. Do not block any vents or openings on the speaker enclosures.
  • Skladování: If storing the speakers for an extended period, disconnect them from power and audio sources. Store them in a cool, dry place away from direct sunlight and extreme temperatures.
  • Péče o kabely: Avoid sharply bending or crimping the power and audio cables. Regularly check cables for any signs of wear or damage.

Odstraňování problémů

Pokud narazíte na problémy s reproduktorovým systémem, podívejte se na následující běžné problémy a jejich řešení:

ProblémMožná příčinaŘešení
Žádný zvuk z reproduktorů
  • Reproduktory nejsou zapnuté.
  • Volume too low on speakers or audio source.
  • Zvukový kabel není správně připojen.
  • Sluchátka zapojená.
  • Ujistěte se, že jsou reproduktory zapnuté.
  • Increase volume on both speakers and audio source.
  • Zkontrolujte všechna připojení audio kabelů.
  • Unplug headphones from the jack.
Zkreslený nebo nejasný zvuk
  • Hlasitost je příliš vysoká.
  • Zdroj zvuku nízké kvality.
  • Uvolněné kabelové spoje.
  • Lower the volume on speakers and/or audio source.
  • Zkuste jiný zdroj zvuku nebo file.
  • Ujistěte se, že jsou všechny kabely pevně připojeny.
Funguje pouze jeden reproduktor
  • Volné spojení s nefunkčním reproduktorem.
  • Vadný audio kabel.
  • Check the connection of the non-working speaker to the primary speaker.
  • Try a different audio cable if available.

Specifikace

Technical details for the Altec Lansing 120 Satellite Speaker System:

FunkceDetail
ZnačkaAltec Lansing
Číslo modelu120
Typ reproduktoruSatelit
Technologie připojeníKabelové
Typ montážeVolně stojící, Plug Mount
Zdroj napájeníElektrický kabel
Kontrolní metodaDálkové (Note: Refers to integrated controls, not a separate remote unit)
BarvaČerný
UPC021986940029

Záruka a podpora

For detailed warranty information, product registration, and technical support, please visit the official Altec Lansing webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případné reklamace.

Poznámka: Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a prodejci.

© 2024 Altec Lansing. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.