Altec Lansing ACS54
Uživatelská příručka k počítačovým reproduktorům Altec Lansing ACS54 PowerPlay Plus
Model: ACS54 | Brand: Altec Lansing
Zavedení
The Altec Lansing ACS54 PowerPlay Plus is a high-performance 5-piece computer speaker system designed to deliver rich, immersive audio. This system includes compact, magnetically shielded satellite speakers and a powerful wood subwoofer, providing extended low-frequency response for enhanced realism. Independent controls for volume, bass, and treble allow for precise audio customization.
Obsah balení
- Two (2) Front Satellite Speakers
- Two (2) Rear Satellite Speakers (with unique bracket/stands for mounting)
- One (1) Powered Wood Subwoofer
- Jeden (1) napájecí adaptér
- Audio kabely
Pokyny pro nastavení
1. Umístění reproduktoru
Position the two front satellite speakers on either side of your computer monitor. Place the two rear satellite speakers behind your listening position, utilizing their unique bracket/stands for optimal surround sound. The subwoofer should be placed on the floor, preferably in a corner, to maximize bass response.
2. Připojení reproduktorů
Image: Two Altec Lansing ACS54 satellite speakers. The left speaker features a volume knob and a treble knob, while the right speaker is a passive unit. Both speakers have a distinctive ribbed design and a circular speaker grille.
- Connect the satellite speakers to the corresponding ports on the subwoofer. Ensure all connections are secure.
- Connect the audio input cable from the subwoofer to the audio output jack (usually green) on your computer's sound card.
3. Připojení napájení
Image: The power adapter for the Altec Lansing ACS54 speakers. The label on the adapter shows input specifications of 120V 60Hz 25W and output specifications of 12V DC 800mA, along with model number VA-120800A and various regulatory marks.
Plug the power adapter into the designated power input on the subwoofer, then plug the other end of the power adapter into a standard electrical outlet. The system is now ready for operation.
Ovládání reproduktorů
Ovládání je ukončenoview
- Knoflík hlasitosti: Located on the front satellite speaker, this knob controls the overall audio output level of the system. Turn clockwise to increase volume, counter-clockwise to decrease.
- Knoflík výšek: Also on the front satellite speaker, this knob adjusts the high-frequency response. Adjust to your preference for brighter or softer high notes.
- Basový knoflík: Typically located on the subwoofer or a dedicated control pod, this knob controls the low-frequency response. Adjust to enhance or reduce bass output.
- Vypínač: Used to turn the speaker system on or off.
Přehrávání zvuku
Once connected and powered on, play audio from your computer. Adjust the Volume, Bass, and Treble controls to achieve your desired sound profile. For optimal surround sound, ensure your computer's audio settings are configured for 5.1 channel output if supported.
Údržba a péče
- Čištění: Use a soft, dry cloth to wipe down the speaker surfaces. Avoid using liquid cleaners or abrasive materials, as they may damage the finish.
- Umístění: Keep speakers away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the subwoofer.
- Skladování: Pokud budete reproduktory skladovat delší dobu, odpojte je od napájení a uložte je na chladném a suchém místě.
Odstraňování problémů
| Problém | Možné řešení |
|---|---|
| Žádný zvuk | Check all cable connections (power, audio input, speaker cables). Ensure the speakers are powered on and the volume is turned up. Verify your computer's audio output settings. |
| Zkreslený zvuk | Reduce the volume level on both the speakers and your computer. Check for loose connections. Ensure audio source is not overdriven. |
| Žádné basy | Ensure the subwoofer is powered on and connected. Adjust the Bass knob. Check your computer's audio equalizer settings. |
| Hučení nebo bzučení | Ensure all cables are securely connected. Try plugging the speakers into a different electrical outlet. Keep speakers away from other electronic devices that may cause interference. |
Specifikace
- Název modelu: ACS54
- Typ reproduktoru: Počítač
- Maximální výstupní výkon reproduktoru: 40 wattů
- Konfigurace kanálu prostorového zvuku: 5
- Průměr subwooferu: 5 palce
- Technologie připojení: Kabelové
- Režim výstupu zvuku: Surround
- Kompatibilní zařízení: Osobní počítač
- Typ ovladače: Remote Control (implied by product features, though physical knobs are present)
- Materiál: Wood (for subwoofer)
- Hmotnost položky: 6 kg 150 g
- Rozměry balení: 42.42 x 30.48 x 23.11 cm
Záruka a podpora
Specific warranty details and direct support contact information are not provided within this manual. Please refer to the product packaging or the manufacturer's official webstránky s nejaktuálnějšími záručními podmínkami a možnostmi zákaznické podpory.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.