Abt huupe arcade Official Rebound System
Specifikace
- Model: Basketball Game X100
- Materiál: Ocelový rám, plastové komponenty
- Rozměry (assembled): 60″ x 36″ x 90″
- Hmotnost: 50 liber
Konec dílůview
Welcome to your HUUPE mini at-home arcade! This is one of the most fun experiences you can have with your HUUPE mini. Please find our instructions below. We’ve tried our best to make this easy, and we have individually labeled everything so there is no confusion.
You should only have to install this once! It folds up and can be stored nicely and without taking up much space when not in use.
Please follow the instructions below!
Please keep screws, bolts, washers, and nuts in their respective labeled bag throughout the process so you know which is which. We often refer to each screw by the bag it comes in throughout the instructions.
Seznam dílů
NÁVOD NA MONTÁŽ
- Find a clean, level place to begin the assembly of your huupe arcade. We recommend that two adults work together to assemble this basketball game.
- Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts List below. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
OBR. 1 a 2 - Attach the Left Board Tubes (#3) to the Left Tube (#5) and then the Right Board Tube (#4) to the Right Tube (#6) using a spring lock as shown in FIG.1.
- Attach the Support Tubes (#9 and #10) to the Mounting Tubes (#11 and #12) using the spring lock as shown in FIG.2
- Attach the Left and Right L Tubes (#7 and #8) using the spring lock as shown in FIG.3
OBR. 4 - Attach the Left and Right L Tubes (#7 and #8) to the Left and Right Tubes (#5 and #6) using Bolts, Washers, and Nuts (#27), and then attach the Left and Right L Tubes (#7 and #8) to the Left and Right Mounting Tubes (#11 and #12) using Bolts, Washers, and Nuts (#27) as shown in FIG.4A & 4B.
- Attach the Support Tubes (#9 and #10) to the Board Tube (#3 and #4) using Bolts, Washers, and Nuts (#24) as shown in FIG.4C. Repeat this step for the other side. Note: Make sure the spring lock is face down.
OBR. 5 - Attæh the Horücntal Tube (41 B) to the Board Tubes (#3 and using Botts. wasners.And Nuts ($24) as shown in FIG.. And then insert the Board L Tubes and the Board Tubes as shown in FIG.5.
OBR. 6 - Připojte Ramp Tubes(#13 and #14) to the Left and Right L Tubes (#7 and #8) using Bolts, Washers, and Nuts (#25) as shown in FIG 6.
OBR. 7 - Připojte Ramp L Tubes(#15 and #16) to the Ramp Tubes(#13 and #14) using the spring lock as shown in FIG. 7.
OBR. 8 - Posuvné elastické pásky a rukáv Ball Ramp with Side Netting (#20) onto Top Net Hanger Tubes as shown in FIG. 8A & 8B.
- Posuňte Ramp U trubice (#17) do objímky koule Ramp s boční sítí (#20), jak je znázorněno na OBR. 8C.
- Připojte Ramp U trubice (#17) k Ramp L Tubes (#15 and #16) using a spring lock as shown in FIG. 8D.
- Posuňte horizontální trubici (#19) před kouli Ramp s boční sítí (#20) a připevněte ji k Ramp U Tube (#17) using Bolts, Washers, and Nuts (#24) as shown in FIG.8E.
OBR. 9 - With the help of another adult, attach the Backboard (#23) to the Board L Tubes (#1 and #2) using Bolts, Washers, and Nuts (#26) as shown in FIG. 9A. At each bottom hole of the backboard, attach the ramp tabs of Ball Return with Netting (#20) using Bolts, Washers, and Nuts (#26) as shown in FIG.9 B Backboard (#23) must be installed in the correct orientation, where the thicker part is on top, as shown in FIG. 9C.
- Insert the Lock Pins (#22) into the Left and Right L Tubes (#7 and #8) as shown in FIG. 9D.
- Install huupe mini over the Backboard (#23) using a door hook. Tighten the door hook knob to secure the huupe mini.
OBR. 10 - Folding position when not in use, the basketball game, and insert the Lock Pin (#22) as shown in FIG. 10. NOTE: The lock pin (#22) needs to be removed from its original position when the game is being used before insertion into the new position when folded.
VAROVÁNÍ: Změny nebo úpravy, které nejsou výslovně schváleny stranou odpovědnou za shodu, mohou zrušit oprávnění uživatele provozovat zařízení.
Nejčastější dotazy
How do I disassemble the Basketball Game X100 for storage?
To disassemble the game for storage, follow the assembly instructions in reverse order. Remove the Lock Pin (#22) and carefully detach all tubes and components.
Can the Basketball Game X100 be used outdoors?
Yes, the Basketball Game X100 can be used outdoors; however, it is recommended to store it indoors when not in use to prolong its lifespan.
Dokumenty / zdroje
 |
Abt huupe arcade Official Rebound System [pdfNávod k obsluze HUUPEREBOUNDER, huupe arcade Official Rebound System, huupe arcade, Official Rebound System, Rebound System, System |